DIN-Rail Mount Dimmer 6ch 2A /per ch. with scene controller (Overheat, Overload, Surge Protection) single phase both 220/110 VAC, 50-60Hz (Green operated supplied by 24VAC/30mA) Small and elegant with easy labeling space, output status LED indicator, network health, broadcast address button and Momentary channel button. Can be used in any location that require energy saving, intelligent control such as apartment, Villa, Offices, Restaurant, Hotels or factories. Can be Manually Programmed by any Electrician on site without need for PC.
Load Compatibility
• Leading edge electronic transformers (Spot/Down Lights++)
• Incandescent lamps
• Track lighting
Smart-Bus Home Automation Control Iphone App Screenshots
TECHNICAL DATA:
Download Datasheet:
http://smarthomebus.com/dealers/Datasheets/SB-DIN6C2A-DN%20(%20Data%20Sheet).pdf
Supply
80-240V, 50/60Hz Single Phase
power consumption: 20-30mA Outputs
2 x dimmed outputs
(leading edge phase control) at
6A each output channel Maximum Total Load
10A recommended total load Control IO
3 x Advanced RS485 S-BUS
serial port links (both train &
screw link types) Upgrade IO
1 x mini USB port (to connect to
special programming board) User Controls
• front panel override switches,
Includes ON/OFF/AUTO override
switch for each channel
• LED status indicator/channel
• Diagnostic LED+ BROADCAST Programming
• Manual Ch. Pairing Programming
Each Channel to a Button
on Wall Panels (e.g. DDP, 6B)
• Advanced Software Configuration
& Programming Compliance
CE Mark Low Voltage
CE Mark EMC | Internal Protection
• Over Heat Protection
• Over Load Protection
• BUS Rv. Polarity Protection
• BUS Short Circuit Protection Preset and Scenes
2X12 Built in Scenes, and 2X4
Sequence Modes and Logics. Installation
• 35mm DIN-Rail Mount Ready
• Wall Mount Ready (8P) SBUS DC Supply
24VDC with flexible tolerance
between 8-32VDC. Flexible
ability to add power supply as
to be needed any where Supply Terminals
Line, 3X Neutral. 2 x 2.5mm2
or 1 x 4mm2 max conductor size
Output Terminals
COM. 1X OUT for each channel
1 x 4mm2 max conductor size Operating Environment
-10º to 45ºC ambient temperature
10% to 93% RH Enclosure & Size
Polycarbonate, DIN-rail (8 Unit) Dimensions & Weight
W 91mm x L 145mm x H 75mm
Packed weight 0.6kg |
