Skin Temperature Display Baby Infant Incubator With Phototherapy Unit
Quick Detail :
1 . Microprocessor based servo controlled temperature system
2 . Control modes:Air mode and baby skin mode
3 . Air temperature, skin temperature , time , heating
4 . power separately displayed by LED
5 . Five alarm functions by audible and visual
6 . > 37 temperature setting
7 . The infant bed inclination is adjustable
8 . Humidity is adjustable continuously
Specifications :
| Item No. | BPYX - 300 |
| Power supply | AC110 / 220 60 / 50Hz |
| Power input | 650VA |
| Environment temperature | 20 ~ 30 |
| Environment relative humidity | 30 % ~ 70 % RH |
| Environment air velocity of flow | < 0 . 3 m / s |
| Air Temperature control range | 25 ~ 38 |
| Skin temperature control range | 32 ~ 38 . 5 |
| Skin temperature senor accuracy | ± 0 . 3 |
| Temperature fluctuation | ± 0 . 5 |
| Uniformity of mattress temperature | ≤ 0 . 8 |
| Warm-up time | ≤ 45min |
| Internal noise level | ≤ 55dB ( A ) |
| Humidity display range | 10 % - 95 % RH |
| Humidity accuracy | ≤ 10 % |
| Infant bed tilt angle | ± 10 ° |
| Mattress size | L65cm * W37cm |
| Trough capacity | 1200ml |
| Air filter | 0 . 5um |
Features :
| 1 . Microprocessor based servo controlled temperature system |
|
2 . Air temperature , skin temperature , timer and heat power separately displayed by LED |
|
3 . Alarm functions including Power failure / Over temperature / Temperature deviation / Temperature sensor failure / Fan failure |
|
4 . > 37 °C temperature setting |
|
5 . A keypad lock prevent inadvertent changes the setting |
|
6 . A second thermal cut - off function for more safety |
|
7 . Humidity is adjustable continuously |
|
8 . Heating power displayed on panel |
|
9 . The infant bed inclination angle is adjustable |
|
10 . Trough for pulling and pushing , which is convenient to add water and wash |
|
11 . Fan with low noise and long life - span |
| 12 . Temperature deviation and over temperature could be amended in front panel directly |
|
13 . Silence / reset button for alarms |
|
14 . Six operating windows , two sides access operating windows can be swiveled |
|
15 . Support bracket |
|
16 . Heater is electrically cut - out if air temperature inside incubator exceed 40 °C |
| 17 . Skin temperature sensor failure protection function avoid over temperature . |
Standard Accessories :
| Main body |
1 . Double wall hood |
| Others |
1 . I.V.Pole |
Optional Accessories :
| 1 . Access door |
| 2 . Infant bed pulled from side door |
| 3 . Infant bed pulled from side and front door |
| 4 . Phototherapy up side unit |
| 5 . Phototherapy from up and down sides |
| 6 . Tray / pole |
| 7 . Oxygen linet |
