Application:
Used where rapid shrinking and space saving is important
Characteristic:
Low shrink temperature further reduces installation time and risk of damage to temperature-sensitive components
Operating temperature:
Minimum shrink temperature: 70 degree Celsius
Minimum fully recovery temperature: 100 degree Celsius
Approvals:
Meet: UL 224 ,125 VW-1 300V RoHS, Sony-SS-00259
Colors: Black, Other colors available on request
Specification:
Normal size (mm) | As supplied (mm) | After recovered (mm) | Standard length (m/spool) | ||
Inside diameter (mm) | Wall thickness(mm) | Inside diameter (Max.) | Wall thickness(mm) | ||
Φ1.0 | 1.4±0.2 | 0.10 | 0.50 | Φ1.0 | 200 |
Φ1.5 | 1.9±0.2 | 0.10 | 0.75 | Φ1.5 | 200 |
Φ2.0 | 2.5±0.2 | 0.10 | 1.00 | Φ2.0 | 200 |
Φ2.5 | 3.0±0.2 | 0.15 | 1.25 | Φ2.5 | 200 |
Φ3.0 | 3.5±0.3 | 0.15 | 1.50 | Φ3.0 | 200 |
Φ3.5 | 4.0±0.3 | 0.15 | 1.75 | Φ3.5 | 200 |
Φ4.0 | 4.5±0.3 | 0.15 | 2.00 | Φ4.0 | 200 |
Φ5.0 | 5.5±0.3 | 0.15 | 2.50 | Φ5.0 | 100 |
Φ6.0 | 6.5±0.4 | 0.15 | 3.00 | Φ6.0 | 100 |
Φ7.0 | 7.5±0.4 | 0.15 | 3.50 | Φ7.0 | 100 |
Φ8.0 | 8.5±0.4 | 0.15 | 4.00 | Φ8.0 | 100 |
Φ9.0 | 9.5±0.4 | 0.15 | 4.50 | Φ9.0 | 100 |
Φ10 | 10.5±0.4 | 0.15 | 5.00 | Φ10 | 100 |
Technical Data:
Property | Test Method | Typical Data |
Operating temperature | IEC 216 | -55 to +125℃ |
Tensile strength | ASTM D 2671 | >14MPa |
Elongation at break | ASTM D 2671 | >400% |
Longitudinal shrinkage | UL 224 | 0 to -5% |
Eccentricity | ASTM D 2671 | <30% |
Elongation at break after aging | 158℃/168 hrs. | >300% |
Flammability | VW-1 | Pass |
Dielectric strength | IEC243 | >20KV/mm |
Volume resistance | IEC93 | >1014ΩNaN |
Copper stability | UL 224 | Pass |
