Specification
Model number: HT-RS-W
Product Specification | ||
Description | Wired Tunnel Road Stud | |
Model number | HT-RS-W | |
Product dimension | 100*108*20mm | |
Input Voltage | Controller : | AV 85V~265V, 50Hz |
Output Voltage | Marker: | DC 24V |
Working Power | Power consumption: | one side≤0.45W;Two sides≤0.9W |
Light source | LED | |
LED Colour | Red/Yellow/White/Green/Blue | |
Light intensity | >6000 mcd / LED | |
Frequency | 30~300 times/ min (adjustable) | |
Flashing Mode | Synchronous flash or continual light | |
Visible distance | >500 m | |
Color Redering Index | Ra≥85 | |
Ingress protection | IP68 | |
Main material | Aluminum Alloy | |
Resist compression | Up to 200KN | |
Net weight | 320g | |
Packing | 2pc/inner box, 50pcs/carton | |
Price: USD1-USD15
Installation
1. Check if the stud charge and discharge in normal way;
2. Identify the place and distance for installation and clean road surface;
3. Clean the bottom of the solar stud and glue the bottom, make sure the whole bottom is covered by glue.
4. Stick road stud onto the road surface. (You can also lay on road surface some glue)
5. After installation, please turn the road stud left and right once again to ensure the road studs paste on the road uniform
6. Steady it with two screws if road condition is bad such as sandy road.
7. Don't put them into use till 8 hours later when they are completely dry.
8. Can be also installed onto column post.
Note:
1. Products should be installed at the edge of the tunnel wall,and can not be placed in the center line of road
2. Install with both epoxy glue and screw
Quick details
Place of origin: China
Brand name: HT
Lead time: 7-15 days after the deposit received
Payment terms: T/T, L/C
Why choose us
Mature technology
Strict quality control
Superior service
We are always focousing on new products developing which meet international market needs
Reasonable price
