ALL-100A AP Universal Gang Programmer
ALL-100A programmer is a revised version of ALL-100 programmer. Major
enhancements include: The revised core processor with built-in 8K-byte
cache speeds up programming time by 10% ~ 50%; The regulated device
supply voltages further improve IC programming stability; The new USB
processor further speeds up and stabilizes data link / transfer.
ALL-100A/AP programmer has 48/68 sets of Precise Universal Pin Driver to
provide high speed, low noise, accurate and reliable programming
signals for various IC products including high speed low power devices
recently released to market.
ALL-100A/AP can be setup for either single-site programming for engineering
or multi-site programming for production. If required, up to 8 sets of
ALL-100AP can be setup for multi-set operation so up to 64 sites can be
programmed simultaneously to maximize production.
The supporting software is updated weekly on web site for check / retrieve
through Internet. Programming of new products will not be neglected after purchasing.
ALL-100A
Introduction
Features
Specification
Ordering Info.
Accessory Search
Software Download
Documentation
Features & Benefits
Excellent performance︰ALL-100A's high freq. core circuit design
significantly cut down programming time for around 10% ~ 50%. Precise
Universal Pin Drivers provide high speed, low noise, accurate and
reliable programming signals for various IC products including high
speed low power devices recently released to market.
Wide range of IC coverage︰ALL-100A supports wide range of IC
products including EPROM, EEPROM, Serial PROM, SPI memory, FLASH,
MPU/MCU product types and DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, QFN,
SON, BGA package types.
Easy to setup, operate and maintain︰ALL-100A setup and operation
can be done easily by connecting Programmer to PC with Windows 2000 / XP
/ Server 2003 / Vista through USB port, load data file or read Master
IC, then select functional options (Program, Verify, Auto...etc.) to
start programming. The self-diagnostic utility makes programmer easy to
checkout / maintain.
High expansion flexibility︰From development / engineering stage
using ALL-100A single-site programming to limited production stage using
ALL-100AP multi-site / multi-set programming, further to mass
production stage using AT3-3XX automated programming, high expansion
flexibility of programming platform is well prepared in advance.
Timely supporting software︰The supporting software is updated
weekly on web site for check / retrieve through Internet. Programming of
new products will not be neglected after purchasing.
World wide service︰Distribution channel covers 35 countries
worldwide, all inquiries / problems can be served easily and timely.
TOP
ALL-100A
Specifications
Core controller
16 bits high freq. core control circuit with big sized FPGA & CPLD
Key functions
Load File, Read Master, Program, Verify, Auto, ID Check,
Checksum, Blank Check, Erase, Secure, Protect / Unprotect, Edit,
Function Configuration, Self Test.
Support devices
IC types︰EPROM, EEPROM, Serial PROM, SPI memory, FLASH, MPU/MCU…etc.
IC packages︰DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, QFN, SON, BGA…etc.
IC leads︰8 pins ~ 300 pins
Device contact
Default︰DIP48 ZIF single socket on Programming Module
Others︰Dedicated sockets on Programming Module per IC package type
I/O channels
ALL-100A single-site︰48 sets of Precise Universal Pin Driver
ALL-100AP multi-site︰68 sets of Precise Universal Pin Driver
Parallel programming
ALL-100A︰Single-site programming
ALL-100AP︰Multi-site programming. Up to 8 sites per set.
Operation control
Base Unit︰YES button – Start programming
ON indicator – Programmer on / ready
BUSY indicator – Under programming
Socket Module︰OK indicator – Pass programming
Data transfer interface
Transfer port︰USB x 1
Transfer speed︰USB1.1︰12 Mb/sec. USB2.0︰480 Mb/sec.
Host computer requirement
An Intel Pentium 4 or compatible processor with 512MB of RAM
At least one USB port is available (V1.1 / V2.0)
50MB free hard disk space
Wins 2000 / XP / Server 2003 / Vista operation system
CD ROM / DVD ROM Drive
Power
Power source︰100~240 VAC 50~60 Hz
Power consumption : ~ 0.5 A
Dimension
W x D x H 150mm x 260mm x 100mm
Weight
~ 4.0 kg
Operation temperature
0 ~ 40℃ (32 ~ 105℉)
Certification
CE certified
