Brushless Fan SMD Digital Solder Rework Station with ceramics Air Heat Gun

Brushless Fan SMD Digital Solder Rework Station with ceramics Air Heat Gun

1. Sensors closed loop , zero-crossing triggering microcomputer temperature control , 2 LED display , temperature accuracy and stability , without the wind effect , demolition real lead-free soldering .

2. Prompt facility and fault alarm , like machine parts heating elements , circuit board etc. had fault , rework station will alarm fault signal , prompt workers have checked the machine .

3. Airflow can adjustable , a large amount of gentle wind , temperature regulation , it can adapt to multiple use .

4. The handle equipped with a sensor switch, as long as the grip handle , thesystem can quickly enter into the working model ; handle back into the handle frame, the system will enter standby mode , real-time operating convenience , meanwhile may be extended heater life .

5. The system has automatic cold wind feature to extend life and protect the hot air gun .

6. Use brushless fan , extremely life , low noise, use high-quality heating elements , it durable and effectively extend the service life of heating elements and power savings .

7. Air gun heating elements use the latest technology ( skeleton type ) , highquality heater production , superior to the similar heater in the market .

8. Air gun heater use high-quality ceramics heater , heating rapidly and long service life .

9. ESD design , to prevent electrostatic damage to the delicate SMD components.

Brushless Fan 2 In 1 Soldering Station , Hot Air Rework Station Main Function

1. SAMSUNG microcomputer control , warming-up quickly.

2. Adjust the air flow and temperature control rotation .

3. Refer to the instructions included with three kinds of nozzles ( big , medium and small ) replacement part .

4. Would replace the part if the resistance value is incorrect .

5. When the temperature is less than 70 degree , can stop rotation automatically.

6. Intelligent system that could alarm , Fault detection automatically

7. High-quality resistance good for long service life

8. Safe solder QFP , PLCC , BGA and other temperature-sensitive components .

9. Intelligent detection and cool airflow features .

10. Green lines and high-quality silicone body heat good for extend life and save power .

Brushless Fan 2 In 1 Soldering Station ,Hot Air Rework Station  Technical Data

*What difference for brushless fan and diaphragm pump ?

diaphragm pump the air are focus , airflow are 24~28L / min . brushless fan the air are soft ,airflow are 120L / min .

Mr. gou Tel: 86-20-87470526
	Enter between 20 to 3,000 chatacters.