Solar power panel ==> Features
1.Aesthetic appearance with excellent efficiency based on innovative
2.photovoltaic technologies
3.Strong frame, passing mechanical load test of 5400Pa, instead of the normal
4.2400Pa,to withstand heavier snow load and higher wind-pressure
Electrical Characteristics,Mechanical Characteristics
and Temperature Coefficient Features.
| ITEM NO.: | Poly 156*156mm cell, 36pcs. | ||||
| Maximum Power(W) | 100wp | ||||
| Optimum Power Voltage(Vmp) | 17.2v | ||||
| Optimum Operatige Current(Imp) | 5.82A | ||||
| Open Circuit Voltage(Voc) | 21.8V | ||||
| Short Circuit Current(Isc) | 6.18A | ||||
| Solar Cell: | 156*156mm Poly | ||||
| Number of Cell(pcs) | 4*9 | ||||
| Brand Name of Solar Cells | JA Cell, Bluesun Cell | ||||
| Size of Module(mm) | 1121mm*673mm*35mm | ||||
| Caple & Connector Type | Pass the TUV Certificate | ||||
| Frame(Material Corners,etc.) | Aluminium-alloy | ||||
| Backing (Brand Type) | TPT | ||||
| Cell Efficiency(%) | 17.73 | ||||
| Weight Per Piece(KG) | 9.05KG | ||||
| FF (%) | 70-76% | ||||
| Junction Box Type | Pass the TUV Certificate | ||||
| Tolerance Wattage(e.g.+/-5%) | ±3% | ||||
| Front Glass Thikness(mm) | 3.2 | ||||
| Temperature Coefficients of Isc(%) | 0.035%/K | ||||
| Temperature Coefficients of Voc(%) | 0.351%/K | ||||
| Temperature Coefficients of Pm(%) | 0.47%/K | ||||
| Temperature Coefficients of Im(%) | 0.04 | ||||
| Temperature Coefficients of Vm(%) | -0.38 | ||||
| Temperature Range | -40°C to +85°C | ||||
| Surface Maximum Load Capacity | 2400Pa | ||||
| Allowable Hail Load | 23m/s ,7.53g | ||||
| Bypass Diode Rating(A) | 12 | ||||
| Warranty | 90% of 10 years,80% of 25 years. | ||||
| Standard Test Conditions | AM1.5 1000W/ 25 +/-2°C | ||||
| Packing | carton or pallet | ||||
solar power panel
Product Description
solar power panel ==> Application:
1. On-grid solar power system
2. Off-grid solar power system
3. For MW-graded solar power plant
4. For water pumping system
7. For hospital ,school & factory
| capsulation | Glass/EVA/Cells/EVA/TPT |
| Size and Number | 125mm*125mm 72/6*12pcs |
| Maximum Power | 100W |
| Tolerance | +-3% |
| Open Circuit Voltage | 31.76V |
| Short Circuit Current | 3.17A |
| Maximum Power Voltage | 41.92V |
| Maximum Power Current | 3.65A |
| Max.syt.Oper.Voltage | 1000V |
| Dimension | 1580*808*35mm |
| Weight | 16kgs (35.24lbs.) |
| Operate Temp. scop | -40 to 85 Celsius degree |
| Relative humidity | 0 to 100% |
| Resistances | 227g steel ball fall down from 1m height and 60m/s wind |
| Warranty | Pm is not less than 90% in 10 years and 80% in 25 years |
High efficiency cell
Strong aluminum alloy frame
Standard tolerance (Guaranteed standard tolerance from -3~+3% ensures power output reliability)
Excellent weak light performance:
Excellent performance under low light environments (mornings, evenings, and cloudy days)
Withstand high wind and snow loads:
Entire module certified to withstand high wind loads (2400 Pascal) and snow loads (5400 Pascal)
Solar power panel ==>> obvious advantages:
ulticrystalline silicon solar panel, pv solar panel, solar pv panel have such characteristic:
1. High-efficiency silicon solar cells, more power in peak hours through cells.
2. Optimized module performance with Nominal Voltage 24/18/12V DC
3. Bypass diodes to avoid hot-sot effect, solar cells are embedded in a sheet of PET and EVA
4. 3.2mm high transmission low-iron, tempered glass, unique esthetic appearance of solar cells
5. Attractive, stable, heavy duty anodized aluminum frames with convenient mounting-access, for high wind-pressure and snow-load.
6.The backside frames are equipped with drainage holes. So we eliminate the risk that rain or snow water may accumulate in the frame lumen and freeze or even bend the frame in cold season.
7. 25 Years limited power warranty, Certificate: CE
Maximum power(Pm) | 50w |
Power Tolerance | ±3% |
Voltage at max power(Vmp) | 17.4V |
Current at max power(Imp) | 2.87A |
Open circuit current(Voc) | 21.6V |
Short circuit current (Isc) | 3.16A |
Operating Temperature | -40to+85°c |
Maximum System Voltage | 715V |
Maximum Series Fuse Rating | 10A |
Standard Test Conditon | Irrandiance 1000W/M2. Module temperature 25°c,AM=1.5 |
Mechanical Characteristics | |
Solar cell | polycrystalline silicon solar cell 156*156mm |
No. of cells and connections | 36=4*9 pcs |
Dimension of module | 535*680*35 |
weight | 5.0kg |
Junction Box | Ip65 rated |
Warranty | Pm is not less than 90% in 10 years and 80% in 20 years |
Resistances | 227g stell balll down from 1m height and 60m/s wind |
Temperature Ceofficients | |
NOCT | 48±°c |
Current temperature coefficient | 0.06±0.01%/K |
Voltage temperature coefficient | -78±10MV/K |
Power temperature coefficent | -(0.5±0.05)%/K |
Solar cells characteristic:
Solar cell is a device that converts the energy of sunlight directly into electricity by the photovoltaic effect. Sometimes the term solar cell is reserved for devices intended specifically to capture energy from sunlight such as solar panels and solar cells, while the term photovoltaic cell is used when the light source is unspecified. Assemblies of cells are used to make solar panels, solar modules, or photovoltaic arrays. Photovoltaics is the field of technology and research related to the application of solar cells in producing electricity for practical use. The energy generated this way is an example of solar energy (also known as solar power).
Solar power panel characteristic:
Connected electrically to one another and to the rest of the system
Protected from mechanical damage during manufacture, transport, installation and use (in particular against hail impact, wind and snow loads). This is especially important for wafer-based silicon cells which are brittle
Protected from moisture, which corrodes metal contacts and interconnects,thus decreasing performance and lifetime.
Most modules are usually rigid, but there are some flexible modules available, based on thin-film cells.
The cost of a solar power panel is determined in part by the size (in Watts), the physical size, the brand, the durability / longevity (or warranty period) and any certifications the solar panel might have.
Choosing a solar power panel on price alone is not wise, as it may not fit the area you wish to install it, may not have the necessary certifications to qualify for government rebates, or may not have the warranty required for economic payback of the power produced.
| Maximum Power(W) | 120w |
| Optimum Power Voltage(Vmp) | 18V |
| Optimum Operatige Current(Imp) | 6.67 |
| Open Circuit Voltage(Voc) | 43.6 |
| Short Circuit Current(Isc) | 7.98 |
| Nmber of Cell(pcs) | 4*9 |
| Size of Module(mm) | 1956*992*50 |
| Front Glass Thikness(mm) | 3.2 |
| Maxium System Voltage (V) | 1000 |
| Temperature Coefficients of Isc(%) | +0.10 |
| Temperature Coefficients of Voc(%) | -0.38 |
| Temperature Coefficients of Pm(%) | 0.047 |
| Temperature Coefficients of Im(%) | +0.10 |
| Temperature Coefficients of Vm(%) | -0.38 |
| Temperature Range | -40°C to +85°C |
| Tolerance Wattage(e.g.+/-5%) | ±5% |
| Surface Maximum Load Capacity | 2400Pa |
| Allowable Hail Load | 23m/s ,7.53g |
| Weight Per Piece(KG) | 23 |
| Frame(Material Corners,etc.) | Anodized Aluminum Alloy |
| Backing (Brand Type) | TPT |
| Warranty | 3 years for the whole product, for the power,90% for 10 years, 80% for 25 years |
| Standard Test Conditions | AM1.5 1000W/ 25 +/-2°C |
| FF (%) | 71.8% |
solar powe panel ==> Mechanical Characteristics
Temperature Characteristics
Nominal Operating Cell Temperature (NOCT) | 45±2 °C |
Temperature Coefficient of Pmax | -0.47%/°C |
Temperature Coefficient of Voc | -0.34%/°C |
Temperature Coefficient of Isc | 0.045%/°C |
1> The output of a solar panel also affects the physical size of the solar panel, meaning the 250Watt solar module will be larger in size to the 100 Watt solar module .
2> The type of solar cells used in its production also determines the size of the solar module.
3>They key issue to consider is that your system overall has enough Watts to power your appliances, and that the solar panels will physically fit in.
Solar power panel ===> Warranties
1.10 years limited product warranty
2.15 years at 90% of the minimal rated power output
3.25 years at 80% of the minimal rated power output
Quality and Safety
1.Rigorous quality control meeting the highest international standards
2.High-transmissivity low-iron tempered glass, strong aluminium frame
3.Using UV-resistant silicon
4.ISO 9001:2008 and ISO 14001:2004
5.IEC61215, IEC61730, Safety Class Inconformity to CE
