M1 THRU M7
FEATURES
•Ideally Suited for Automatic Assembly
•Low forward voltage drop
•Surge Overload Rating to 30A Peak
•Low Power Loss
•Built-in Strain Relief
•Plastic Case Material has UL Flammability
Classification Rating 94V-O
MECHANICAL DATA
•Case: Molded plastic
•Terminals:Solder Plated.Solderable per MIL-STD-750, Method 2026
•Polarity:Cathode Band or Cathode Notch
•Marking:Type Number
•Weight:0.064grames(approx)
MAXIMUM RATINGES AND ELECTRICAL CHARACTER
•Ratings at 25°C ambient temperature unless otherwise specified
•Single phase, half wave, 60HZ, resistive or inductive load.
•For capacitive load derate current by 20%
SYMBOLS | M1 | M2 | M3 | M4 | M5 | M6 | M7 | UNIT | ||
Maximum Repetitive Peak Reverse Voltage | VRRM | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts | |
Maximum RMS Voltage | VRMS | 35 | 70 | 140 | 280 | 420 | 560 | 700 | Volts | |
Maximum DC Blocking Voltage | VDC | 50 | 100 | 200 | 400 | 600 | 800 | 1000 | Volts | |
Maximum Average Forward Rectified Current, 0.375″(9.5mm) lead length at TL=100°C |
I(AV) |
1.0 | Amps | |||||||
Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load(JEDEC method) |
IFSM |
30 |
Amps | |||||||
Maximum Instantaneous Forward Voltage at 1.0A | VF | 1.1 | Volts | |||||||
Maximum DC Reverse Current at rated DC blocking voltage | TA=25°C
|
IR | 5.0 | μA | ||||||
TA=125°C | 200 | μA | ||||||||
Reverse Recovery Time(Note 1) | trr | 2.5 | μS | |||||||
Typical Junction Capacitance(Note 2) | CJ | 15 | pF | |||||||
Typical Thermal Resistance(Note 3) | RJA | 30 | °C/W | |||||||
Operating and Storage Temperature Range | TJ | (-65 to +150) | °C | |||||||
Storage Temperature Range | TSTG | (-65 to +150) | °C | |||||||
NOTES:
1. Measured with IF=0.5A,IR=1.0A, Irr=0.25A
2. Measured at 1.3MHZ and applied reverse voltage of 4.0V DC.
3. Mounted on P.C. Board with 8.0mm2 land area
