5.00/5.08mm pitch Screw PCB Terminal Connector
There are 5.00/5.08mm pitch for selection. OEM service is available.
Below is the information of 5.00/5.08mm Screw PCB Terminal Connector
1. Pitch:5.00/5.08mm
2. Screws: M2.5 steel Zinc plated
3. Clamp: Brass, Ni plated
4. Pin Header: Brass, Tin plated
5. Housing: PA66, UL94V-0
6. Rated voltage: 300V
7. Rated current: 12A
8. Contact resistance: 20mΩ
9. Insulation resistance: 5000MΩ/1000V
10. Withstanding Voltage: AC2000V/1Min
11. Wire range: 26-14AWG 2.5mm²
12. Temp.Range: -40℃~+105℃
13. MAX Soldering: +250℃ for, 5 Sec.
14. Torque: 0.4N.m 3.5Lb.in
15. Strip length: 5-6mm.
Below is the drawing of 5.00/5.08mm Screw PCB Terminal Connector for reference, more information would be sent on your request.
Details of 5.00/5.08mm Screw PCB Terminal Connector
| Item NO. | MX127 |
| Pitch | 5.00/5.08mm |
| Screws | M2.5 steel, zinc plated |
| Clamp | Brass, Ni plated |
| Pin Header | Brass, tin plated |
| Housing | PA66, UL94V-0 |
| Rated voltage | 300V |
| Rated current | 12A |
| Contact resistance | 20mΩ |
| Insulation resistance | 5000MΩ/1000V |
| Withstanding Voltage | AC2000V/1Min |
| Wire range | 26-14AWG 2.5mm² |
| Temp.Range | -40℃~+105℃ |
| MAX Soldering | +250℃ for, 5 Sec. |
| Torque | 0.4N.m 3.5Lb.in |
| Strip length | 5-6mm. |
| package | we packed in the standard cartons:28*28*42cm,or as your requirement |
| Payment | 100% TT before shippment |
Use
A terminal block must first be mounted in a safe, stable location away from moisture. To use it, strip about ½ inch of insulation from the two wires you want to connect. You then insert the bare wires into the block's metal connectors and screw them down until they're securely fastened.
Noted
Dear friend,thank you very much for you pay attention to our terminal blocks,please contact with Angelo Tse at any time,I will give you a quick reply and try my best to do all the thing well.
Thank you very much for your attention to terminal blocks connectors
