100" Aluminum Alloy Manual Board cutter Cutting machine for KT board

 
 100" Aluminum Alloy Manual Board cutter Cutting machine for KT board
Specifications:

 
 
Specially for Sign MakingIndustry:
 
foam board, gator board, corrugated plastics, pvc and other foam, paper, and plastic based products
up to 12mm thickness;
Superbly styled;
innovative hinge and lift arm frame;
stainless steel flat blades;
safety trimmer heads;
self-sharpening;
wide variety of trimming applications;
smooth, clean cut by a pass;
strong stand and convenient waste catching basket (optional);
 
 
Features:
 
This aluminium alloy cutter is a kind of cutter of middle-high grade. The extended rail enables the accurate cutting by long lining possible, this result usually can not be achieved by other cutters of small size. However it is used alone or combined with the stand, it can also provide the operator with service of accuracy and safety. The two pieces of silica gel strips on the bottom can avoid it to move during operation, meanwhile can protect the surface of table on which the cutter is placed.
 
1. Note of  use
 
a. Place the cutter flatly, or its blade is easy to be twisted. Put the material to be cut on the board and align, the push or pull the cutting part until the material is cut completely. By use together with the stand, it creates a bigger and more accurate cutting board.
 
b. This cutter is suitable only for cutting by single way.
 
c. The blade is adjustable, and can be hidden into the part when no use for long time. The standard blade can cut thickness of 10 mm , the maximum thickness allowed is 13 mm by pulling the blade out a little. Set the depth - adjusting blot in accordance with the thickness of the material cut to make sure the depth of the blade should be 0.5 - 1.5 mm lower than surface of the flat board.
 
d. As materials to be cut are different, it is necessary or possible for multiple cutting and adjustment of the depth of the blade in some cases.
 
e. Blade should be replaced when it happens that material moves or cuttering is difficult.
 
f. Prefered materials to be cut is foamy board or paperboard.
 
2. Maintenance of the produce
 
a. Clean with dry cloth .If there is obstinate stain, use half – wet cloth only.
It is unnecessary to apply oil or lubricate onto the plastic parts of the product for the sake of fear that they can be damaged easily.
 
b. It is strongly suggested that the blade be hidden into the slot holder and dust - proof membrance be covered on the product when it will be kept away for long time.
 
 
Products Details:
    
 
 
Committed to Quality
 
At WELDON, quality is job one. Rejects and reworks are costly to us and cause delays to our customers.
 
 
Focused on Service
 
We understand that for us to be successful, our customers have to be successful. Together as a team, we will work with you to service your requirements, whatever they might be.