ASME SA210 seamless tube

ASTM A210/ASME SA210 seamless tube

ASME SA210, ASTM A210, heater tubes, Seamless tube, superheater tubes 

ASTM A210 is the standard covers seamless medium-carbon steel boiler and superheater tubes.

ASTM A210 also covers minimum-wall-thickness, tubing sizes, boiler flues including safe ends, arch and stay tubes. ASTM A210 provides tensile and hardness properties but only applicable to certain size limitations. Material manufacturing shall be killed. Tubes shall be made by seamless process, marked as either hot-finished or cold-finished. Surface condition shall be specifically stated in the order. Chemical composition shall conform to the requirements. Elemental composition other than listed here shall not be permitted. Tension test, flattening test, flaring test, hardness test, hydrostatic or nondestructive electric test shall be made on specimens. Superheater tubes shall be formed without defects and shall withstand expansion, beading, forging, welding, and bending.

This abstract is a brief summary of the referenced standard. It is informational only and not an official part of the standard; the full text of the standard itself must be referred to for its use and application. ASTM does not give any warranty express or implied or make any representation that the contents of this abstract are accurate, complete or up to date.

ASTM A210/ASME SA210 Grade:

• ASTM A210 A1

• ASTM A210 GR.C




Mechanical Properties of ASTM A210:

Grade	C(Max)	Mn	Si(Min)	P(Max)	S(Max)
ASTM A210 A1	0.27	Max.0.93	0.10	0.035	0.035
ASTM A210 Gr.C	0.35	0.29~1.06	0.10	0.035	0.035

Chemical composition  (%) of ASTM A210:

Grade	Tensile Strength(Mpa)	Yield Strength(Mpa)	Elongation (%)
ASTM A210 A1	≥ 415	≥ 255	≥ 30
ASTM A210 Gr.C	≥ 485	≥ 275	≥ 30

Delivery Condition:




• Annealed, Normalized, Normalized and Tempered




Surface treatment:




• Oil-dip, Varnish, Passivation, Phosphating, Shot Blasting




Application:




• For high, middle, low pressure boiler and pressure purpose




Both ends of each crate will indicate the order no., heat no., dimensions, weight and bundles or as requested.




Usage:

Steel pipe are ubiquitous and can be found underground and within residential walls, laboratories, and commercial and industrial structures. Seamless steel pipe transport fluids including water, natural gas, waste and air. Three manufacturing methods exist to produce steel pipes.




Seamless steel pipes are produced using an extrusion mold. Welded steel pipes are produced by rolling a sheet of steel into a tube and welding the seam. Seamless steel pipes are less expensive. The third method is casting. Molten steel is poured into a casting mold.

Our steel pipes and tubes are the preferred choice for processes under the following conditions:

- high temperatures




- and/or high pressure




We have a team of experienced professionals with years of experience in manufacturing.










•