ND-LAW-5A1-C Automatic Armature Winding Machine
Main technical data:
| Wire diameter range: | ￠0.25~￠1.0mm |
| Armature diameter: | ￠20~￠60 mm |
| Armature stack length: | 10~60 mm |
| Armature slot number: | odd or even slot |
| Shaft length: | 50~ 250mm |
| Turn number: | 0~99999 |
| Commutator diameter: | ￠18~￠40 mm |
| Winding speed: | 0~3000 rpm |
| Indexing speed: | 0~3000 rpm |
| Action: | single action or automatic |
| Production efficiency: | 600pcs/8hours(based on armature with 12slots 24hooks, 20turns) |
| Air supply pressure: | 4~6 Kg/cm2 |
| The machine total power: | 4.0 KW |
| Voltage: | three phase AC380V±10%, 50/60 Hz |
| Weight: | about 1180 Kg |
Feature:
Three winding mode: single slot-single hook, single slot-double hook and double layer winding. It could do twice winding in one slot, four times winding in the two adjacent slots.
It could select to wind single or twice, set to wind on the journal of the armature, slow rise and slow decline function, stable type fixture, up-down protective module, protective hooking.
Only can snap break the wire: winding before break the wire, or break before winding.
Production parameter for 100nos armatures could be stored
Display parameter, including shift output, total output, consuming time, present slot No. turn No. and hook No., etc.
Automatic alarm if any abnormal condition occurs: alarm on the touch screen, buzz alarm and light tower alarm.
Manually put the armature onto the winding station.
Main Configuration:
Indexing servo motor: 750W*1 spindle: Mitsubishi
Winding servo motor 1000W*2 spindle: Mitsubishi
PLC: Mitsubishi FX3G/FX1N
Extension module: Mitsubishi
Relay: Omron
Proximity switch: AUTONICS, Omron or Shenshi
Touch screen: 7", WEINVIEW
Air switch: MITSUBISHI
Transformer: Changzhou Huatong, three phase 400V, single phase 230V
Combined power source: NIDE
Circuit breaker: DELIXI
Indicator and button: SCHNEIDER
Button box: SCHNEIDER
Operation box: sheet plate
Automatic safety door: Not available
Ball bearing: UBC or NSK
Transmission linear guide: ABBA or HIWIN or TBI
Automatic scissor: Not available
Winding top transmission base: nodular cast iron
Winding bottom transmission plate: steel plate
Winding flier: die-casting aluminium alloy, integral type, double shaft balancing calibration, easy disassemble, standard type
Winding spindle: standard short spindle
Winding fixture: Cr12 integral quenching, HRC60
Indexing transmission base: nodular cast iron
Indexing spindle: standard model 22-14(OD22mm, ID14mm)
Operation plate: cast iron, 1260(L)x 945mm(W)x80mm(Thickness), natural aging more than two years.
Buffer: AIRTAC
Cylinder: AIRTAC
Pressure reducing valve: AIRTAC
Air source treatment elements: SMC
Electromagnetic valve: SMC
Semi-auto loading structure: AIRTAC cylinder + linear bearing + guide shaft. Manually put armature onto the winding station, manually remove the wound armature from the winding station.
Tensioner: MITSUBISHI electric magnetic powder tensioner (wire diameter range: ￠0.2~￠0.65mm)
Or WANNER (Switzerland brand)/Hangzhou Puwei magnetic tensioner(wire diameter range: ￠0.19~￠0.45mm)
Or Dongwan Zhangli Hysteresis electronic tensioner(wire diameter range: ￠0.19~￠0.25mm)
Rotor winding Machine detailed picture
Armature winding by this rotor winding machine
Double palm "start" button.
