Parking System Used Intelligent Vehicle Loop Detector
Quick Detail:
vehicle loop detector
- Easy installation
- Compatible with parking system
- Single loop and double loop
- Two relay out
Applications:
The WSTV-410 vehicle loop detector is a double channel inductive loop detectors. The principle is based on a change in the inductance within the loop which is caused by the metallic components of passing vehicles. The changes are picked up and evaluated by a microprocessor. Ease of use thanks to automatic calibration when the operating voltage is applied.
The loop detectors must only be placed in dry rooms or control cabinets that are protected against
all types of moisture and wetness. A distance of at least 10 mm from other devices must be maintained
on each side. The ambient temperature must not exceed 65° C. The installation of the induction loop is
described in other operating instructions. The loop detectors must only be placed in dry rooms or control cabinets that are protected against all types of moisture and wetness. A distance of at least 10 mm from
other devices must be maintained on each side. The ambient temperature must not exceed 65° C.
The installation of the induction loop is described in other operating instructions.
Specifications
Supply voltage: 230V AC , 115V AC, 24V DC/AC, 12V DC/AC
( See the label on the detector)
Voltage tolerance AC: +10% / -15%
Voltage tolerance DC: ±15%
Power Consumption: 4.5VA
Output relays: 240V/5A
Operating temperature: -20°C to +65°C
Storage temperature: -40°C to +85°C
Frequency range: 20 kHz to 170 kHz
Reaction time: 100ms
Signal holding time: Unlimited
Sensitivity: Adjustable in 3 increments
Loop inductance: Total loop plus connection wiring: 50μH to 1000μH.
Ideal is 100μH to 300μH
Loop connection wiring: Maximum length 20 meters, twisted at least 20 times per meter
Size of Housing: 78x40x108 mm (L x W x H)
