1.Product introduction:
KYL-AD-02 is a 2 way Analog to Digital Module,which can achieve the signal isolated acquisition between the different sensor and host. The acquisition precision of the product is up to the 24 bits.The design is according to industry standard,with standard DIN 35 rail mounting. The module supports standard Modbus RTU protocol and ASCII characters protocol.
2.Specifications:
Signal input: 0~±100mV,0~±10V,0~±20mA,4~20mA
Power supply: 8~50 VDC
Channels: 2
Acquisition precision: up to the 24 bits
Baud rate: 300,600,1200,2400,4800,9600,19200,38400bps
Data format: 10 bits,1 start bit,8 data bits,1 stop bit
Communication response time: 100ms max
Output interface: RS485 or RS232
Operating temperature: -45℃~+85℃
Features:
· Low cost and small size
· 2 channel analog inputs
· Input signal can be: 0~±100mV,0~±10V,0~±20mA,4~20mA
· Output as RS485/RS232 interface,which can rectify the precision of the module
· Withstand 3000VDC isolation voltage
· Wide power supply:8~50 VDC
· Signal between channel to channel is isolated
· Support Modbus RTU communication protocol
· High anti-interference ability and good reliability
Convenient programming and easy to install
Typical applications:
· signal measurement, monitoring and control
· RS-485 remote I / O, data acquisition
· application of intelligent building control, security engineering
· industrial automation control system, the RS-232/485 bus
· Industrial signal isolation and long-term transmission
· equipment operation and monitoring
· measurement of sensor signals
· the industrial data acquisition and recording
· medical, industrial and product development
If you have any question,welcome to contact Minerva:
sales01(at)rf-data(dot)com
RF(dot)Minerva828(at)gmail.com
my skype: rf-data
Phone: 86-13467456234
