Complete UHT Milk Processing Line / UHT Milk Production Plant With Aseptic Brick Carton Package
DESCRIPTION
With a product that can be stored for long periods without spoiling and with no need for refrigeration, there are many
advantages for both the producer, the retailer and the consumer. This includes expensive products such as cream,
desserts and sauces.
In a modern UHT plant (Ultra High Temperature) the milk is pumped through a closed system. On the way it is
preheated, highly heat treated, homogenised, ultra highly heat treated, cooled and packed aseptically. Low acid
(pH above 4.5 – for milk more than pH 6.5) liquid products are usually treated at 135 – 150C for a few seconds holding, by either indirect heating or direct steam injection or infusion. High acid
(pH below 4.5) products such as juice are normally heated at 90 – 95C for 15 – 30 seconds holding. All parts of the system downstream of the actual highly heating section are of aseptic design to
eliminate the risk of reinfection, include aseptic packaging in packages protecting the product against light and
atmospheric oxygen. Ambient storage is normal.
Various UHT systems:
There are two main types of UHT systems on the market.
- In the direct systems the product comes in direct contact with the heating medium, followed by flash cooling in a
vacuum vessel and eventually further indirect cooling to packaging temperature. The direct systems are divided into:
•steam injection systems (steam injected into product),
•steam infusion systems (product introduced into a steam-filled vessel).
- In the indirect systems the heat is transferred from the heating media to the product through a partition (plate or
tubular wall). The indirect systems can be based on:
•plate heat exchangers,
•tubular heat exchangers,
•scraped surface heat exchangers,
Furthermore it is possible to combine the heat exchangers in the direct systems according to product and process
requirements.
The figure below is an indirect system - tubular UHT plant as an example.
BENEFIT
1.Opportunity to realize products with customized recipes.
2.Opportunity to produce more than one product with the same processing line.
3.Very short holding times at pasteurizing temperature.
4.High quality of the final product keeping an elevated nutritional value.
5.Wide customization of the final product.
6.Extended shelf life of the product.
7.Maximum yield, minimum production waste.
8.Highest energy savings thanks to the most advanced technologies.
9.Complete line supervision system through monitoring of every process phase.
10.Recording, visualization and printing of all daily production data.
CONSTRUCTION FEATURES
Working capacity from 10 tons/d up to 500 tons/d
Products - UHT skimmilk
- UHT whole milk
- UHT milk with various fat content
- UHT flavor milk
