75L rubber and plastic dispersion mixer
Usage:
Forrubber or plastic plasticzing and mixing or rubber and plastic blending.
Features:
1.Rubber or plastic stock can be plasticized or mixed in a closed and pressurizedspace with the temperature controlled so that the productivity is high and thequality is good and stable.
2.Optimization of the parameters such as the helical angle of rotor wings and thewing overlap length brings about even distribution of the stock.
3.All the parts in contact with stock are ground, plated with hard chrome andpolished. The rotor wings are built up by welding with the abrasion-proofsintered carbide to resist abrasion and corrosion.
4.All the parts in contact with stock are of the jacket design wherewater/steam/medium oil is lead through to provide cooling or heating and canmeet different requirements for the rubber or plastic mixing process.
5.Stock is fed through the rear door of the framework (or another port) anddischarged by the mixing chamber tilting forward by 140°. Such a design makesit possible to arrange the upstream and the downstream process steps in a lineand facilitates stock color changing and the mixing chamber cleaning.
Main parameter
Total volume of mixer chamber 180L
Mixer chamber mixer volume 75L
Rotor speed 32/24.5r/min
Pressure to material 0.14-0.19 Mpa
Pressure of compressed air 0.5～0.8 MPa
pressure of cooling water 0.2~0.4MPA
Rotation angle of mixer chamber 140°
Overall dimension L3330xW2620x H3340MM
Available custom capacities: 1L~200L
For inquiry, please feel free to contact us by eva@aq-rubber.com, or visit our official website of http://www.rubbermachinery.icoc.cc AoQian will be your reliable cooperator.
