Specification
Power Supply | DC15V(4A) (The adaptor should be connected within 2 meters from the IR High-speed Dome) |
Working temperature | －30°C～+60°C |
Relative Humidity | 10-90% |
Power Consumption | 35W |
Communication Protocol | PELCO_D / PELCO_P / PELCO_D1 |
Communication Method | RS485 bus cable |
Communication Baudrate | 1200/2400/4800/9600bps |
Address range of Speed Domes | 1～255 |
Manually controlling Panning Speed | 0.5°～120°/S |
Range of Pan/tilt | Pan 360° endless, tilt 0°～+90° |
Auto flip function | Auto-flip when vertical 90° |
Speed Auto-control as per the changing of zoom ratio | The pan/tilt can automatically adjust the running speed following the change of the zoom ratio |
OSD Menu | 4 input modes, all the functions of the pan/tilt and the camera module can be oprated through the OSD menu |
Preset Position number | 128 |
Left & Right scan | The beginning and the end point free to be set, 3 grades of speed (low, medium and high) optional |
360° Scan | Vertical angle free to be set, 3 grades of speed (low, medium and high) optional |
Tour Group | 4 groups, 16 preset positions for 1 tour group, dwelling time at each preset position can be set |
Pattern Scan number | 4 |
Privacy Mask Zone number | 8 |
Idle Time functions | The function to be carried out in idle time can be configured, including invoking preset position, Left&Right scan, running tour etc |
Alarm Functions | 4 channels in, 1 channel out |
IR Lamp | 2 groups, made up of LED Array, 120m visible distance |
Brightness control for IR lamps | Support brightness-control for IR lamps, including auto-control and manual-control 2 modes. The brightness is controlled by controlling the number of the groups of the IR lamps to be turned on. |
IR light triggering control | Triggered by photosensitive resistor / triggered by camera module (IR Lamp turned on when camera module turns to Black & White mode), altogether 2 methods |
Protection Grade | IP66 |
Lightening-proof | 2 grades anti-lightening design, 3 groups protecting point (video, communication and power) |
Weight | 5.6Kg |
Characteristics
1. The cover is constructed with aluminum alloy, which ensures compact structure, high shielding strength and excellent heat-dispersion effect. The lower part of the unit is designed as exposed, which effectively solve the heat-dispersion problem for the camera module and the IR lamps etc parts.
2. The Main Part, the Camera Module and the IR lamps are designed as isolated cover-shielding, which ensures not only good heat-dispersion effect but also water-proof effect and high reliability.
3. Latest LED Array technology is adopted for the IR lamp, LED Array has higher brightness, longer visible distance, more evenly distributed light field and much longer lifespan.
4. Brigtness-controlling function is supported for the IR lamps. Brigtness-controlling function consists of auto-control(indoor mode), auto-control (outdoor mode) and manual-control altogether 3 modes. According to the distance of the monitoring object, low, medium or high brightness of the IR lamps can be chosen for shooting, which can be expected to meet the requirement of brightness for different-distance object.
5. Driven by a stepper electric motar, the unit runs smoothly, reacts quickly and locates positions accurately.
6. In-built module programme can automatically identify different camera modules including SONY, HITACHI, LG, JCO etc. Other camera programmes can also be added as per the requirement of the customers.
7. Day&night IR-sensible camera module equiped inside. In the daytime, it is in color mode, the image is vivid; at night, it turns to Black&white mode, the image is crisp. Thus, all day long (24hours) monitoring is realized.
8. Adopting full-functional high-performance DSP design, performance stable
9. Multiple protocol and baudrate supported, high compatibility.
10. EEPROM data storing method adopted, so that the internally saved data will not lose when power off
11. Powerful OSD Menu: 4 kinds of input methods. All the functions of the Pan/Tilt and the Camera Module can be configured and run through OSD menu.
12. 128 preset positions for accurate location, 1 Left & Right scan, 4 tours, 4 pattern scan, 8 privacy mask zones.
13. Support Idle Time function: According to actual requirement, the user can configure the function that the IR High-speed Dome Camera should carry out in idle time. The functions that can be set as Idle Time function includes Invoking Preset Positions, Left & Right scan, Tours etc.
14. Support wire alarm function, 4 channels in, 1 channel out
15. Memory recalling function once power on after power off
Description of Functions
1. IR Lamp
The latest LED Array technology is adopted for this IR High Speed Dome Camera. LED Array is highly integration of traditional LED. Comparing with traditional LED, it has some advantages as below.
A. Higher brightness: Since LED Array is integration of LED, the brightness and the viewing distance are greatly increased.
B. Longer lifespan, due to the difference of the transparent material and the heat-dispersion effect, the lifespan of the LED Array is about 10 times as the traditional LED.
C. More evenly distributed light: The half-intensified beam angle of the traditional LED is about 10°, well it is 10°-120° (variable angle) for LED Array, which together with multi-angle disposal make the light evenly distributed and can light the whole room.
For this unit, the latest 3rd generation IR LED Array technology is adopted, campared with the 1st and 2nd generation IR LED Array, it has advantages as below:
A. The light giving out efficiency is much higher. The latest technology is adopted for the 3rd generation IR LED Array, under the same power consumption, the brightness is 2.5~3 times as the previous LED Array. At night, the visible distance is up to 150m or so.
B. The heat produced is much less when the IR lamp is turned on. Since the light generating efficiency of the 3rd generation IR Led Array is much higher, under the same power, less power is turned into heat and wasted, thus the lifespan of the IR Lamp is much longer.
2. Whole-day (24 hours/day) monitoring
The camera module inside is IR sensitive with IR-cut. In the daytime, the image is color and vivid. Well, at night, it turns to B&W, at the same time, the IR lamps will be turned on, which ensures the image crisp. Therefore whole-day (24 hours) monitoring is realized.
3. OSD Menu Operation
All the functions of the pan/tilt and the built-in camera module can be conveniently configured and carried out through the OSD menu. These functions include: Preset Positions, Tours, Pattern Scan, Left & Right Scan, Privacy Mask, Alarm, Language Choosing, and the configuration of the parameters of the Camera Module etc. The user can also edit the title of the IR High-speed Dome Cameras and the preset positions through multiple Input Modes, so that the titles are easier to be remembered and identified. The above functions make the IR High-speed Dome Camera really realize intelligent control and in-time monitoring.
4. Trace the Target
The users can control the movement of the unit by operating the joystick of the keyboard so that they can trace the moving object or change the monitoring area. The angle of view or the size of the image of the object can be changed through adjusting the focal length. In the default Auto-focus, Auto-Iris state, following the movement of the unit, the lens will quickly adjust itself to get clear image according to the change of the object.
5. Automatic Adjustment of Focal Length/Movement Speed
When the focus is long and in the mode of manual adjustment, due to the high sensitivity of the IR High-speed Dome Camera, even the slightest movement of the joystick would make the image move quickly, which causes image losses. Based on human design, the IR High-speed Dome Camera can automatically adjust the horizontal and vertical moving speed of the pan/tilt according to the current focal-length, which makes the manual target-tracing operation much easier.
6. Configure and Invoke Preset Positions
The preset position function works in this way: the IR High-speed Dome Camera stores the data of the pan/tilt angles and lens focal-length in current state; when needed, invoke these data, then promptly move the pan/tilt and camera module to the corresponding position. Through the OSD menu, the user can quickly and conveniently configure, invoke, delete the preset positions and edit the title of the preset positions. When the user invokes the preset position through the OSD menu, the unit will move to the preset position promptly, at the same time, the title of the preset position edited by the user will be shown. The unit supports 128 preset positions.
7. Automatic Tours
The automatic tour function is a built-in function of the IR High-speed Dome Camera. Through beforehand programming, the user can arrange the preset positions into the automatic tour in the desired order. When it's needed to run the tour, operating through the OSD menu, the user can make the IR High-speed Dome Camera automatically move as per the order of the preset positions configured in the tour with preset time intervals.
a. The staying time at each preset position can be configured.
b. Altogether 4 tours can be configured with the unit.
c. Sixteen preset positions can be stored in one tour.
8. Left & right Scan
Left/right limiting positions can be conveniently set through OSD menu. After configuring well, the user can run the left/right scan directly through the OSD menu, then the IR High-speed Dome Camera will automatically run horizontally between the left limiting position and the right limiting position, at the preset speed.
9. 360° Scan
360° endless scan is supported. When running 360° scan, the unit will rotating endlessly. There are low, medium and high 3 grades optional for the running speed of the 360° scan.
10. Pattern Scan
The unit can store the user's operating track and invoke it when necessary. A 4-minutes operation is acceptable to be stored for one Pattern Scan track. Altogether 4 Pattern Scan tracks can be stored in this unit.
11. Privacy Mask
Within the monitoring range, if some privacy zones should be shielded from being monitored, some mask zones can be set within the monitoring image. Altogether 8 Privacy Mask zones can be set in the unit.
12. Alarm Function
The user can set the key areas as alarm points. Through the linkage with the external-connected detector, once there is alarm signal transmitted to the unit, the unit will promptly adjust the camera module to shoot the alarm point, at the same time, it will output alarm signal through the alarm output port.
13. Idle Time Function
Users can set the function that is to be carried out in idle time as the Idle Time Function. If the user exit the OSD menu after finishing with other operations, and if the IR High-speed Dome Camera is in still state without running, then after a period of time during which nobody operates the unit, the unit will automatically begin to carry out Idle Time Function that is configured in advance. The functions that can be set as Idle Time Function include invoking preset position, running left&right scan, running tour etc. The length of the period of time after which the Idle Time Function is to be carried out can be set, the range is 1~240minutes.
14. Memory recalling function once power off
The unit has memory recalling function when power is off. If the unit is running preset position, left & right scan, 360° scan, auto tour etc functions when the power is off, then once the power is on, the unit will automatically resume the ever-running functions after finishing self-checking
15. Camera module Lens Control
Users can adjust the Focal-length through controlling the keyboard to get panoramic view or close view that they desire.
Focal Length Control
Users can adjust the Focal-length through controlling the keyboard to get panoramic view or close view that they desire.
Focus Control
The system takes automatic focus as the default. While moving, the camera module can automatically focus on the center of the object view to get clear image. Under special circumstances, the user can manually adjust the focus to achieve desired image effect.
a) Manual focus can be realized through controlling the keyboard or matrix. For details, please refer to the operation manual of the controlling keyboard or matrix.
b) In the state of manual focus, the user can control focal–length to make the lens focus on objects. If the IR High-speed Dome Camera is configured to resume auto-focus upon joystick operation, when there is operating on the joystick, the IR High-speed Dome Camera will automatically focus. If a period of time is configured for auto-focus resuming, once there is no controlling order received, after the period of time, the IR High-speed Dome Camera will resume auto-focus.
Under the following circumstances, the camera module can not carry out auto-focus:
a) When the object is not in the center of the view.
b) When simultaneously observe a far object and a near one, clarity for both of the images can not be guaranteed at the same time.
c) When observing objects with extreme brightness, such as neon lights, spotlight, etc
d) When the object is behind the glass with water drops or dust
e) When the object moves very fast
f) When the object is large-sized and drab, such as wall
g) When the object is too dark or fuzzy
Iris Control
a) The system takes automatic-iris as the default. The iris can automatically sense the change of the environmental light and make quick adjustment, so that the brightness of the image is stable.
b) The user can manually adjust the iris through controlling the keyboard to obtain desired brightness for the image.
Automatic Back Light Compensation (BLC)
Automatic Back Light Compensation can be realized via district dividing. In extremely bright background, the camera module can compensate the brightness of the relatively dark objects, while adjust the light of the bright background, avoiding that the whole image is too bright to watch due to the too high brightness of the background while the object is too dark to be distinguished, so that clear image can be got.
Automatic White Balance
According to the ambient brightness, the camera module can automatically adjust the White Balance to re-display the real colors
