SWA MV Copper Conductor Medium Voltage Power Cables With XLPE Insulation ZR YJV
2.Directly Factory Sales
3.CCC,ISO9001,OHSAS,TLC Honor
Specification : ZR YJV 3*70+1*25
Application:
It is used to transmit and distribute power in power transmission and distribution system of 35kV or lower.
It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and
communication in complete replace of oil immersed paper insulated power cable and in partial replace of PVC
insulated power cable.
The type, Name, Suitable areas
| Type |
Name |
Suitable areas |
|
| Copper-conductor |
AL-conductor |
||
| YJV | YJLV |
XLPE-insulated cable sheathed with PVC |
Indoor, tunnel, cable channel |
| YJY | YJLY |
XLPE-insulated cable sheathed with polythene |
|
| YJV22 | YJLV22 |
XLPE-insulated cable sheathed with PVC and armored with steel tape |
Direct burial in the ground and the capacity of bearing certain mechanical force, not proper in the pipeline |
| YJV23 | YJLV23 |
XLPE-insulated cable sheathed with polythene and armored with steel tape |
|
| YJV32 | YJLV32 |
XLPE-insulated cable sheathed with PVC and armored with thin steel wire |
The bed of river and shallow sea, as the link line between the two platforms of oil and gas station in the water, the capacity of bearing tensile force. |
| YJV33 | YJLV33 |
XLPE-insulated cable sheathed with polythene and armored with thin steel wire |
|
| YJV42 | YJLV42 |
XLPE-insulated cable sheathed with PVC and armored with thick steel wire |
|
Using Features:
1. Rated voltage: Uo/U: 26/35kV, 21/35kV, 12/20 kV (24 kV), 8.7/10kV, 8.7/15kV, 6/6kV, 6/10kV.
2. No. of core: Single-core, Three-core.
3. The highest allowed operating temperature of conductor for long-term working is 90oC. In short-circuit (Max. Long-term is no more than 5 seconds). The highest temperature for conductor is no more than 250.
4. D.C Resistance of the conductor complies with the stipulations of GB/T3956-1997.
5. The environment temperature should be no lower than 0 when lay. Otherwise it should be preheated.
6.The cable is laid without horizontal drop limit. The Min. Bending radius of three-core cable should be no smaller than 12 times of cable outer diameter.
7. Working Frequency Voltage Test:.
For cable with Uo of 3.6kV or lower: 2.5Uo+2kV/5min without puncture.
For cable with Uo of 3.6kv~18kV: 3.5Uo/5min without puncture.
For cable with Uo of 21kV and 26 kV: 2.5Uo/30min without puncture.
8. Partial Discharge Test: The discharge volume should be no more than 10pC under 1.73Uo for the cable.
This series includes:
Copper (aluminum) core, XLPE insulated and sheathed power cables.
Copper (aluminum) core, XLPE insulated, PE sheathed power cables.
Copper (aluminum) core, XLPE insulated, steel tape armoring PVC sheathed power cables.
Copper (aluminum) core, XLPE insulated, steel tape armoring, PE sheathed power cables.
Copper (aluminum) core, XLPE insulated, steel wire armoring, PVC sheathed power Cables.
Copper (aluminum) core, XLPE insu
