20L×2 Automatic Commercial Beverage Dispenser For Hot Drinks / Cold Drinks With CE
Quick Detail:
CE certificate
10 years manufacturer
double-sided refrigeration system
environment friendly
Description:
1. The panel is made of R304 stainless steel which is high-grade and easy cleaning.
2.The compressor is derived from the best famous and professional compressor Cubigel
3. Red copper evaporator conducts cool air very fast
4. Our models are very complete from 9L to 50L.
5.We supply cooling function machine,heating function machine and both cooling and heating
combination one.All can match with mixing and spraying function.
6. Magnetic rotating
7. The tank is made of PC(Polycarbonate) meterial which is high/low temperature resistance, innoxious,
antiflaming and good flexibility.
8. We have been in this line for about 10 years; our customers are over 20 countries. We always supply
the best service after-sale.
Applications:
Hoteluse ,restaurant,store , supermarket
Specifications:
20L×2 Automatic Commercial Beverage Dispenser For Hot Drinks / Cold Drinks With CE
|
Model |
LRSJ-20L×2 |
|
Voltage |
220-240V/110-115V |
|
Frequency |
50/60/HZ |
|
Cold poqer |
385W |
|
Heat poqer |
1200W |
|
Cold-beverage temperture |
7C-12C |
|
Hot-beverage temprture |
52C-58C |
|
Shape size |
640×380×690 |
|
Carton Packing |
660×420×750 |
|
Weight |
38 |
|
Gross weight |
40 |
Installing mathods and notices
1: To install it ,pls choose the site which is flat,fixable and can avoid the direct sunshine in sunmmer.
2:Around the juicer, should have 150mm up room to make the air circulating and make sure the machine
can run effectively.
3:Before installing, pls check the supply whether confirm the requirements or not. The power supply cable
is not too thin or too long. The cross section of cable should be 1.5-2.5mm, Voltage is mounted on the
fixed position with fuse which will keep the users safety,it must have reriable grounding. The socket
should be mounted on the fixed position with fuse which keep the machine running safety.
4;To make the fix position for juicer,should make its frond lower and back higher(to ajust the foot of
bottom can do it), then the water in the salver can flow into the box through the hose.
