CE approved 2.4A Single USB car charger for iPhone6 iPad Android mobile phone and tablet
1. Input Features:
| Rated input voltage | DC12-24V |
| Input voltage range | DC10-28V |
| Efficiency | 88-94% |
2. Output characteristics:
|
Rated output 5V 1.0A/1.2A/2.1A/2.4A |
Specification limits |
Remark |
|
|
Min value |
Max value |
||
|
Unload output voltage |
+4.9VDC |
+5.3VDC |
|
|
Full load output voltage |
+4.75VDC |
+5.25VDC |
|
|
Output current |
0 |
1.0A/1.2A2.1A/2.4A |
|
|
Cc mode rate load cold ripple |
|
mV |
|
|
Over current protection |
|
A |
Adjustable |
|
Turn on delay time |
|
≤3S |
|
|
Hold up time |
8mS |
|
Full load |
3. Protective properties:
|
Over current protection |
Under any input conditions,when output current is greater than the set current,the protection mode is on, after output current become lower than the set current, the charger willautomatically restart work. |
|
Short circuit protection |
Under any conditions, when short circuit occurs the protection mode is on, after short circuit disappears, the charger will automatically restart work |
| Over temperature protection |
After the charger works for a long time, if the temperature is higher than that of IC set working temperature, the protection mode is on, if the temperature drops to IC set temperature again,the charger will automatically restart work. |
|
Over voltage protection |
When output voltage is bigger than the set voltage, the protection mode is on, if the outputvoltage drops to set voltage again, the charger will automatically restart work. |
4.EMI Test Report:
