36 Core Reinforced Armored Fiber Optic Network Cable GYTA53 with Double sheathed PE Jacket
Quick Detail:
- GYTA53 Fiber Optic Cable
- G.652D or G.657A
- Cable Diameter 2~36 core: 13.5mm
- Tensile Strength Long/Short Term: 1000/3000N
- Crush Resistance Long/Short Term: 1000/3000 N/100m
- Bending Radius Static/Dynamic: 10D/20D
- GYTY53 cable complies with Standard YD/T 901-2001as well as IEC 60794-1.
Description:
The fibers, 250μm,are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then, the cable is completed with a PE sheath.
Applications:
- Adopted to Outdoor distribution.
- Suitable for aerial duct and buried method.
- Long distance and local area network communication.
|
KT3004 GYTA53 Outdoor Fiber Optic Cable Layer-Stranded Reinforced Armored Double Sheathed PE Jacket |
||||||
| Description&Standards : | ||||||
|
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate (APL) is applied around the cable core. which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally
applied over the inner sheath, the cable is completed with a PE outer sheath. |
||||||
| GYTY53 cable complies with Standard YD/T 901-2001as well as IEC 60794-1. | ||||||
| Characteristics: | ||||||
| Good mechanical and temperature performance; | ||||||
| High strength loose tube that is hydrolysis resistant; | ||||||
| Special tube filling compound ensure a critical protection of fiber; | ||||||
| Crush resistance and flexibility; | ||||||
| The following measures are taken to ensure the cable watertight: | ||||||
| (1)Steel wire used as the central strength member; | ||||||
| (2)Loose tube filling compound; | ||||||
| (3)100% cable core filling; | ||||||
| (4)APL moisture barrie; | ||||||
| (5)PSP enhancing moisture-proof; | ||||||
| (6)Water-blocking material. | ||||||
| Technical Parameters: | ||||||
| Cable Type |
Cable Diameter (mm) |
Cable Weight (kg/km) | ||||
