10.2 " LED backlight tft sunlight readable lcd monitor with CPU & RS232 interface
Product Parameter
Model: STA102WT-01 (Advanced Type)
Physical Parameter | Model: | STA102WT-01 |
Size (Inch): | 10.2’’ | |
Resolution: | 1024×RGB×600 | |
Pixel Spacing: | 0.1905mm×0.0635mm (H×V) | |
Color: | 65536 colors (16 bit) | |
Viewing Area: | 220.4mm×129.1mm | |
Overall Dimension: | 246.5mm×147.8mm×16.5mm(N)/18.5mm(T) | |
Net Weight: | 765g(N)/795g(T) | |
TFT Panel: | A+ Level Industry Panel | |
Touch Screen: | Industry Level 4 wire resistance | |
| ||
Backlight Parameter | Backlight Type: | LED |
Brightness: | 500cd/m2 | |
Contrast: | 500:1 | |
Backlight life: | 100000 hours | |
Viewing Angle: | 80°/80°/60°/80°(L/R/U/D) | |
Working Temperature: | -30 +85 | |
Working Humidity: | 60,90% | |
Storage Temperature: | -30 +85 | |
Screen Mode: | Digital | |
| ||
Performance Parameter | CPU: | CortexM3 STM32F103 200MHz |
LCD Controller: | CPLD EPM240 | |
Refresh Rate: | 60Hz | |
Picture Switching Speed: | 46 ms/picture (22 pictures/s) | |
Flash Memory: | Standard 2GB,Extension 4GB | |
Memory Amount for picture: | 236 images | |
Interface: | RS232 /TTL UART Interface | |
Pictures downloading: | MiniUSB2.0 (12Mbps) | |
Voltage Range: | DC4.5V 35V (Typical value: 12V) | |
Power: | 5.0W | |
Test Report | |
MTBF: | 4,250,000 H |
Working Temperature: | -30 +85 |
Air Humidity: | 60,90% |
Continuous Vibration Testing: | 10-55Hz,1.5mm,10G |
Impact Acceleration Testing: | 6ms,100G |
ESD Testing: | 10KV |
Radiation Reliability Testing | 44W |
All Models
Main Size of TFT LCD Module | |
Size | Resolution |
3.5” | 320×RGB×240 |
4.3’’ | 480×RGB×272 |
5.0” | 640×RGB×480 |
5.6’’ | 640×RGB×480 |
5.7” | 640×RGB×480 |
6.5’’ | 640×RGB×480 |
7.0’’ | 800×RGB×480 |
8.0’’ | 800×RGB×600 |
8.4’’ | 800×RGB×600 |
10.2’’ | 1024×RGB×600 |
10.4’’ | 800×RGB×600 |
12.1’’ | 1024×RGB×768 |
15.0’’ | 1024×RGB×768 |
15.6’’ | 1366×RGB×768 |
18.5” | 1366×RGB×768 |
Product Description
1. Used as Touch-controller & TFT-LCD display system
2. Controlled by Any MCU via simple "Command Sets"
3. Low Cost HMI device
Operation
1. Design a group of "Graphical User Interface" that you need.
2. Connect your equipment with our TFT-LCD Module by RS232, RS485 port or TTL Logic directly.(Don't need any driver program)
3. Write a control program for any MCU to work the TFT-LCD Module via "Command Sets".
Software Description
We offer you 3 simple softwares to work with TFT-LCD Module.
1. Assistant software: To upload pictures and files into TFT-LCD Module, and demonstrate the commands.
2. Touch Control software: To create the control file.
3. Font software: To create the font file.
Product Pictures
