Mini Hydraulic Power Units Por Medical Care Equipment Factory
Model Specifications
|
Model |
Motor Volt |
Rated Speed |
Displacement |
System pressure |
Tank Capacity |
|
YBZ-C0.32W2XO/UUCOTL1 |
24V |
2000rpm |
0.32mL/r |
6.5MPa |
1L |
|
YBZ-D0.26W2X0/UUCQTL1 |
0.26mL/r |
10MPa |
Remark: Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
Special notes
1. The duty of this power unit is S3, i.e., 30 seconds on and 270 seconds off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
3. Viscosity of the oil shoud be 15~68 cst, and the oil should be clean and free of impurities,N46 hydraulic oil is recommended.
4. This power unit should be mounted vertically.
5. Check the oil level in the tank after the initial operation of the power unit.
6. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
General Description
Serving as the power source of operating table, this power unit is designed exclusively for lifting the electrical operating table in the application of medical care equipments, whose features are low noise, low current and small size. Furthermore, it is applicable to sickbed.
Outline Dimension
