| PART NO. | THREAD E | HOSE BORE | DASH | DIMENSIONS | ||
| DN | A | C | S1 | |||
| 20611-14-04 | M14X1.5 | 6 | 04 | 18 | 5.5 | 19 |
| 20611-16-05 | M16X1.5 | 8 | 05 | 19 | 5.5 | 22 |
| 20611-16-06 | M16X1.5 | 10 | 06 | 19 | 5.5 | 22 |
| 20611-18-06 | M18X1.5 | 10 | 06 | 20 | 5.5 | 24 |
| 20611-20-08 | M20X1.5 | 12 | 08 | 22 | 6.5 | 27 |
| 20611-22-08 | M22X1.5 | 12 | 08 | 22.5 | 6 | 27 |
| 20611-24-10 | M24X1.5 | 16 | 10 | 24.5 | 6.5 | 30 |
| 20611-26-10 | M26X1.5 | 16 | 10 | 25.5 | 6 | 32 |
| 20611-27-10DT | M27X1.5 | 16 | 10 | 25.5 | 6 | 32 |
| 20611-27-10T | M27X2 | 16 | 10 | 25.5 | 6 | 32 |
| 20611-30-10D | M30X1.5 | 16 | 10 | 26.5 | 6 | 36 |
| 20611-30-12D | M30X1.5 | 20 | 12 | 26.5 | 6 | 36 |
| 20611-30-12 | M30X2 | 20 | 12 | 26.5 | 6 | 36 |
| 20611-36-16 | M36X2 | 25 | 16 | 30 | 6.5 | 41 |
| 20611-39-16 | M39X2 | 25 | 16 | 30 | 6.5 | 46 |
| 20611-45-20 | M45X2 | 32 | 20 | 31 | 8.5 | 55 |
| 20611-52-24 | M52X2 | 40 | 24 | 32 | 10 | 60 |
| Note: 1.For use with braided hoses. 2. If use with spiral hoses, hose fitting series number is 20612-xx-xx; | ||||||
Female Straight Pipe Swivel (NPSM) fittings
SAE 45° Female Swivel fittings
JIC 37° Female Swivel (Exceptions Noted) fittings
Female Swivel 30° Flare (Komatsu, Linkbelt) fittings
British Standard (BSPP) 60°Cone Female Pipe Swivel fittings
Female JIS 30° Flare Parallel Pipe Swivel fittings
BSPP Flat Face Female Swivel (HIAB Cranes-Swedish) fittings
READY-LOK Male Connector (For Deep Mining Markets) fittings
Split Flange Straight (SAE Code 61) fittings
Split Flange Straight —Metric (Komatsu, Linkbelt, etc.) fittings
We also supply other standard fittings, such as follow:
JB o-ring metric male flat seat REF. JB/T 988
Metric male 24°cone seat L.T. ISO8434—DIN 3861
Metric female 24°cone o-ring L.T. DIN 3865
Metric female multiseal L.T. DIN 3868
45°Metric female 24°cone o-ring L.T. DIN 3865
90°Metric female 24°cone o-ring L.T. DIN 3865
90°Metric female 24° multiseal L.T. DIN 3868
Metric male 24°cone seat L.T. ISO8434—DIN 3861
Metric female 24°cone o-ring L.T. DIN 3865
Metric female 24°multiseal L.T. DIN 3868
45°Metric female 24°cone o-ring L.T. DIN 3865
45°Metric female multiseal L.T. DIN 3868
90°Metric female 24°cone o-ring L.T. DIN 3865
90°Metric female multiseal L.T. DIN 3868
Metric male double use for 60°cone seat
90° Metric female 60°cone
Metric male 90° cone
Metric female multiseal
45°Metric female multiseal
90°Metric female multiseal
Metric standpipe straight DIN 2353
90°Metric standpipe straight DIN 2353
Retaining nut
Cutting ring
Inverted Male Swivel 90° Tube Elbow
JIC 37° Female Swivel 90° Tube Elbow (Exceptions Noted)
SAE 45° Female Swivel 90° Tube Elbow
JIC 37° Female Swivel Long Drop 90° Tube Elbow (Exceptions Noted)
British Standard (BSPP) 60° Cone Female Pipe Swivel 90° Elbow
Female FOR-SEAL Swivel Short Drop 90° Elbow
Female FOR-SEAL Swivel Long Drop 90° Tube Elbow
Male Pipe (NPTF) Rigid
British Standard 60° Cone (BSPP) Male Pipe Rigid
FOR-SEAL Male Rigid
Male Pipe Swivel
SAE 37° Male Rigid
Male Straight Thread O-Ring Rigid
JIC 37° Female Swivel(Exceptions noted)
Female Swivel DIN Universal Seat l. Rh. (Light) (DIN 3901/3902)
Female Swivel DIN 24° Seat s. Rh. DKO (Heavy)
Female Swivel 30° Flare Metric Thread (Komatsu, Linkbelt, etc.)
British Standard (BSPP) 60° Cone Female Pipe Swivel
Female FOR-SEAL Swivel Straight
READY-LOK Male Connector (For Deep Mining Markets)
Split Flange Straight (SAE Code 61)
Split Flange Straight (SAE Code 62)
British Standard 60° Cone (BSPP) Female Swivel 45° Tube Elbow
Split Flange 22-1/2° Tube Elbow (SAE Code 61)
JIC 37° Female Swivel 45° Tube Elbow (Refer to Footnotes)
Split Flange 30° Tube Elbow (SAE Code 61)
Female FOR-SEAL Swivel 45° Tube Elbow
JIC 37° Female Swivel 60° Tube Elbow
Split Flange 45° Tube Elbow (SAE Code 61)
Split Flange 45° Tube Elbow (SAE Code 62)
Split Flange 60° Tube Elbow (SAE Code 6
British Standard (BSPP) 60° Cone Female Pipe Swivel 90° Elbow
JIC 37° Female Swivel 90° Tube Elbow (Refer to Footnotes)
Female FOR-SEAL Swivel 90° Short Drop Tube Elbow
Female FOR-SEAL Swivel Long Drop 90° Tube Elbow
Split Flange 90° Tube Elbow (SAE Code 61)
Split Flange 90° Tube Elbow (SAE Code 62)
Design and Construction
Forging and maching process for shaped products of elbows, tees and crosses, while cold drawn barstock is for the staights.
Most of our Connector products are made of carbon steel, brass, but also they can made of stainless steel or other material under the drawing of customers.
Finish
Zinc plating with silver chromate (zinc chromium 6 free) is used on all standard steel products. Stainless steel fittings are passivated.
Zinc and Nickel plating, electroless Nickel plating are also alternative option.
High Quality Standards
As an ISO 9001 certificated manufactory, we ensure that our design and manufacturing processes are the highest quality by maintaining proper certification and in-house inspections.
Under the requirement of ISO, we have a rotating gage calibration schedule to make sure the dimensions of each fitting component is 100% accurate based on specified measurements.
We have a professional quality inspection team. Individually trained employees control the manufacturing process with strict statistical analysis and control. We can ensure that each identical fitting component you order is true to the design specifications.
Packaging and Shipping
All Huayan orders are packaged in-house by our employees in strong cartons wrapped in protective caps. All packages are clearly labeled with text and bar information. Then we will put boxes into an wooden case with a big plastic bags.
As usually we delivery order 45-60 days after the order. Customers may also inquire about our Just-In-Time manufacturing process or expedited manufacture and shipping for products needed within 24 hours.
Customer Service
Our website will also help guide you through the various metal types of hydraulic fittings and more. Provide us with a faxed or email sketch of your required hydraulic fitting components along with the desired quantity and we will be able to give you a quote within 24 hours.
Thank you for visiting Hua Yan Hydraulics!
