I---Introduction
It is applied to measure dielectric loss angle and Volume Resistivity of insulating oil etc.
II---Technical specification
| 1 | Condition of Use | -5ºC_40ºC RH<80% | ||
| 2 | Power Source | AC 220V±10% Without Frequency Limit | ||
| 3 | High Voltage Output | 1000V_2200V Every 200V | ||
| Precision | 2% | |||
| Capacity | 50VA Output Current 25mA | |||
| 4 | Temperature Control Induction Stove | Maximal Power 500W | ||
| 5 | TemperatureControl Range | <100ºC | ||
| 6 | Temperature Measuring Error | ±0.5ºC | ||
| 7 | Control Temperature Error | ±1ºC | ||
| 8 | Control Temperature Time | Room Temperature 90ºC <20min | ||
| 9 | Measuring Range | tgδ Without Limit | ||
| Cx 15PF-300PF | ||||
| Rx 10M-10T | ||||
| 10 | Precision | Δtgδ: ΔCx : ΔRx : | ±(Reading*1.0%+0.020%) ±(Reading*1.0%+0.5PF) ±Reading * 10% | |
| 11 | Relative Dielectric Loss Constant | εr | Calculated Automatically | |
| 12 | Volume Resistivity | ρ | Calculated Automatically | |
| 13 | Dimension | 450(L)×310(W)×360(H) | ||
| 14 | Weight | 18Kg | ||
.jpg)
.jpg)
.gif)
