Customized Hydraulic Power unit pack for Tail gate lift with dc motor
Detailed introduction:
General Description
Consitsting of high pressure gear pump, DC motor, multi-functional manifold, valves and reservoir, this power unit features a basic neutral open, power up power down function, which is used to the drive and control a group of double acting cylinders.
|
Model |
Motor Volt |
Motor power |
Rated Speed |
Displacement |
System pressure |
Tank Capacity |
|
YBZ5-F1.2A1W4/WUAAN1 |
12VDC |
1.5KW |
2500rpm |
1.2mL/r |
20MPa |
3.5L |
|
YBZ5-F1.6B1W4/WUAAN1 |
1.6mL/r |
5L |
||||
|
YBZ5-F2.7B2A4/WUDBN1 |
24VDC |
2KW |
2.7mL/r |
6L |
||
|
YBZ5-F2.5F2A4/WUDBN1 |
2.5mL/r |
14L |
Remark: Please go to page 38 or consult our sales engineer for the different pump displacement, motor power or tank capacity.
Special notes
1. The duty of this power unit is S3, i.e., 30 seconds on and 270 seconds off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
3. Viscosity of the hydraulic oil shoud be 15~68 cst, which should also be clean and free of impurities. N46 hydraulic oil is recommended.
4. Oil changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
5. The power unit should be mounted vertically.
