Door Construction: type FINGERJOINT filled with stabilizing
core AND HONEYCOMB PAPER filled in.The door is covered on both
sides with MDF board .
Frame construction: The frame is
made of blockboard and the ledge is made of plywood. The adhesives used are
consisted of two components (polyurethane) .
But you could also choose constructing the frame from solid
wood.
Wall width: 10-24cm. Hole in wall :200cm*80cm .Door size:2000*800*40
For any sizes canbe customized.
Below info for you to found out suit door
Confirm the door hole 3 size for get the suit door
1.Door Hole's High ,Width, measure 3 times(up, middle, down) get minimum data (≤20mm)
2.Wall Thickness ,measure 3 times (up, middle, down) get minimum data (≤5mm)
3.Wall thickness ≥80mm,if not reach 80mm ,need extend to 80mm for door frame stronger
4.Measure door size in kitchen and bathroom ,notice that add wall tile's thickness (wall tile's generally 25mm thickness single side )
Confirm door open direction
Confirm door open direction
A:Hinges : Right Left PUSH
B:Hinges : Right Left PULL
C:Hinges : Left Right PULL
D:Hinges : Left Right PUSH
