Silicone Rubber Strainer Extruder For Silicagel Impurity Filtrating ISO
|
Application: |
Silicon Rubber |
Certification: |
ISO |
|
Product Name: |
Strainer Extruder |
Screw Diameter: |
220 |
|
Screw Form: |
Double Helix, Not Equidistant |
Driving Form: |
Direct-coupled |
Applications:
The strainer is specialized in filtrating the impurity for silicagel. The design of the side roller highly improves its capacity.
Specifications:
I. Configuration:
1.<, manufactured by Type-315 Jiangyin Kewei Reducer Factory;
2. 90 kW, 6 grade AC inverter motor , Jiangsu Dazhong Electric Motor;
3. material of barrel and screw: 38CrMoAlA, surface are chrome plated;
4. Barrel body jacket uses spiral cooling;
5. Surface of side roller: chrome plated, and water cooling;
6. Single mould: surface of inside cavity of mould are chrome plated; size and form of discharge hole of mould are produced by the orderer’s design drawings; hydraulic locking device;
7. Domestic Brand Delixi Contactor;
8. Changzhou Huibang electronic digital display intelligent thermometer;
9. Frequency control of motor speed, using 90kW Japan Fuji Inverter (made from Wuxi of China);
10. The entire equipment contains strainer(main part) 1 set, operating floor 1 set, electric box 1 set, hydraulic station 1 set.
II. Technical parameters:
|
No. |
Project Name |
Major Parameter |
|
1 |
Screw diameter (mm) |
220 |
|
2 |
Screw form |
Double helix, not equidistant |
|
3 |
Driving form |
Direct-coupled |
|
4 |
Motor Power (kW) |
90 |
|
5 |
Structure of barrel jacket |
Spiral |
|
6 |
Jacket pressure-bearing (Mpa) |
0.4 |
|
7 |
Jacket cooling circuit |
4 circuits |
|
8 |
Boundary dimension |
According to Jiuyang Standard |
|
9 |
Size of discharge port(mm) |
150x130(or can be customized) |
|
10 |
Center height of discharge port(mm) |
700(or can be customized) |
|
11 |
Mesh aperture(mm) |
9,taper 1:50 |
|
12 |
Water inlet |
Inner diameter 40 |
|
13 |
Water outlet |
Outer diameter 57 |
III. Technical requirements:
|
No. |
Project Name |
Requirements & Conditions |
|
1 |
Equipment painting |
The whole machine: according to Jiuyang Standard or customer requirements |
|
|
|
Couplings Housing: according to Jiuyang Standard |
|
2 |
Technical documents |
|
|
|
|
|
|
|
|
|
|
|
|
|
IV. Technical quality assurance:
1. Under the condition of load conditions, the reducer shall not cause abnormal sound;
2. Under the condition of load conditions, the motor can’t overheat. When low speed, overcurrent can not occur, keeping the three-phase current balance;
3. When the screw is in the load or no-load condition, no rubbing inwalls and doors;
4. Side roller for feeding materials do not generate friction;
5. The machine should be applied to the normal condition of production of silicone rubber;
6. Unlocking and locking action of the locking device should be accurate and in place;
7. The hydraulic system: Solenoid valve control, in addition to a total flow control valve, also has the pressure retaining valve. The hydraulic tank has oil level of liquid level indicator.
8. All pipes through the cooling water are made of stainless steel pipe.
