Name:PC material with the built-in driver LED bulb
Item No. | EBT-LZD-03 | EBT-LZD-04 |
Power | 4W | 4W |
Input Voltage | AC:220+_10%V | AC:220+_10%V |
Power Factor | ≥0.6 | ≥0.6 |
Working Frequency | 50-60Hz | 50-60Hz |
Power Efficiency | ≥90% | ≥90% |
Color Temp (K) | 3000/4000 /5000/6000 | 3000/4000 /5000/6000 |
CRI | ＞80 | ＞80 |
Luminous Efficacy | ≥90LM/W | ≥90LM/W |
Rated Life | 35000h | 35000h |
Operating Environment | -40℃-+50℃ | -40℃-+50℃ |
Features
1.Cover is made of plastic inflaming retarding materials.
2;Made of PC material with high light transmittance ,light transmittance up to 95%,Illumination uniformity is good,non irritating to the eyes. No UV or radio frequency interference .
3.With the built in driver ,shockproof,anti interference ,no mercury,no noise,no flash.
4.Compared to the traditional incandescent lamp or fluorescent lamp,lifetime is longer and save energy more than 66%.
5.Voltage AC185-265V,the ballast ,wild voltage and constant flow design are not required.
6.It meets the testing standard of CE,ROSH etc.
7.Adopt E14 general lamp cap ,can replace the incandescent lamp or fluorescent lamp etc.
Standard
EN 55015:2006/A2:2009
EN6100-3-2:2006/A2:2009
EN 6100-3-3:2008
EN 61547:2009
Application
Use widely on the Shopping mall, office building , hotel, meeting room, exhibition hall ,advertising lighting , civil use etc.
Installation Instructions
LED bulb lamp uses (E14) interface mode, easy installation, the product directly to a clockwise twist in the end seat . NOTE: ( This light and easy to use , regardless of the zero line and the line of fire, can be arbitrary and voltage of 220V connection ) .
Precautions
1 Please carefully read the product specifications, confirm whether the use of environmental conditions on the specification ;
2 first cut off the power before the product installation to prevent electrical shock
3 try to avoid touching the surface of the lamp after the lamp is lit ;
4 this product is for indoor use , please note waterproof outdoor use when ;
5 Do not squeeze through the mask when installing fixtures , lamps and scratch to avoid damage to the fingers ;
6 the product should be avoided in the heat and hot steam , corrosive gas , so as not to affect the life ;
7 products using high pressure (220V) power supply , frequent power outages should not be working in the state , it will affect their life.
