12-P-160 Mud Pump
The 12-P-160 mud pumps are featured by its compact structure, small weight and land use and high efficiency and can be
equipped with drilling rigs according to the requirements and site conditions.
The 12-P-160 mud pump are durable and compact and can ensure stable operation. During shallow and middle to deep
drilling, the 12-P-160 mud pump can meet the special requirements of users.
The durable fluid end of 12-P-160 mud pumps significantly increases the performance of three cylinder mud pump, in addition,
the independent structure is easy to inspect and maintain.
12-P-160 Mud Pump Detail:
12-P-160 Mud Pump Specification:
Rated input Power | 1193KW(1600HP) |
Stroke /Minute | 120 |
Stroke Length | 12" |
Max. Working Pressure | 5000psi |
Gear Ratio | 3.439:1 |
Max. Liner Size | 7 1/4" |
Suntion inlet Flange | 10" flange |
Discharge Outlet Flange | 5 1/8"flange,5000psi |
Approx Weight | 54697lb |
Overall Dimension(L*W*H) | 17.42*9.48*6.25ft |
Features of Power end in 12-P-160 Mud Pump
The base of machine frame adopts one-piece welded structure and the seats of main bearing and transmission bearing are
made of one-piece cast steel, the whole pump has good stiffness and strength.
The crankshaft adopted a mosaic structure of alloy steel forge with full balance, so that it operate very smoothly.
The pinion shaft is made of an integral structure and belt pulley or chain wheels may be installed on either or both side of
the shaft.
Roller bearing are installed at both ends of the shaft in order to improve the stability in operation and bearing capacity.
The gears and crossheads of the bearing are lubricated by splash methods.
The integral herringbone gear structure is adopted to ensure that the pump operates
smoothly.
The extension rods are connected to the crossheads by pin holes, so as to ensure the concentricity of the pump, the packing
adopts quad layer sealing structure, which realizes good seal performance.
Features of Fluid end in 12-P-160 Mud Pump
The hydraulic cylinder is deployed in an L form so as to keep the liquid flow stable and to reduce vibration and pressure fluctuation.
The combined hydraulic cylinders are interchangeable and may be replaced individually.
The fast rotary valve cover is easy to remove and install. The cone bolts have a self-locking mechanism which helps to reduce
vibration at the valve cover and to ensure the fastening and stability.
The piston rod and intermediate rod are jointed by clamps, which is easy to remove and replace.
The combined piston rod allows replace of pistons without need to disassemble the liners.
12-P-160 Mud Pump Parameter:
Liner Size | in | 7 1/4 | 7 | 6 3/4 | 6 1/2 | 6 1/4 | 6 | 5 1/2 | 5 | 4 1/2 | 4 | |
Discharge Pressure | MPa | 22.5 | 24.1 | 25.9 | 27.9 | 30.2 | 32.8 | 34.5 | 34.5 | 34.5 | 34.5 | |
psi | 3200 | 3430 | 3690 | 3980 | 4305 | 4670 | 5000 | 5000 | 5000 | 5000 | ||
Stroke/Minute | Power | Displacement L/min(GPM) | ||||||||||
SPM | KW | HP | ||||||||||
120 | 1193 | 1600 | 2922 | 2724 | 2533 | 2349 | 2172 | 2002 | 1682 | 1389 | 1124 | 890 |
(772) | (720) | (669) | (621) | (574) | (529) | (444) | (367) | (297) | (235) | |||
100 | 994.1 | 1333 | 2435 | 2270 | 2111 | 1958 | 1810 | 1668 | 1402 | 1158 | 938 | 742 |
(643) | (600) | (558) | (517) | (478) | (441) | (370) | (306) | (248) | (196) | |||
80 | 795.9 | 1067 | 1948 | 1816 | 1689 | 1566 | 1448 | 1334 | 1121 | 927 | 750 | 594 |
(515) | (480) | (446) | (414) | (383) | (353) | (296) | (245) | (198) | (157) | |||
60 | 597 | 800 | 1461 | 1362 | 1267 | 1175 | 1086 | 1001 | 841 | 697 | 564 | 447 |
(386) | (360) | (335) | (310) | (287) | (264) | (222) | (184) | (149) | (118) | |||
40 | 397.6 | 533 | 974 | 908 | 844 | 783 | 724 | 667 | 561 | 462 | 375 | 295 |
(257) | (240) | (223) | (207) | (191) | (176) | (148) | (122) | (99) | (78) | |||
Company introduction
Xi'an KINGWELL OILFIELD MACHINERY Co., Ltd. (KINGWELL) is a highly reputable supplier
for oilfield equipment and services to Oil & Gas industries and provides complete solutions.
With over 10 years developing, we were developed from the beginning drilling service to manufacture factory who produce
OCTG, DST tools and Solid control products.KINGWELL have experienced team, stronger enough to meet any challenge,
we do believe honest is the base of business and cooperation; our aim is to build solid relationship with any part of honest.
kingwell can provide highly efficient services to its clients resulting in accurate and timely deliveries at the best prices. Our
products have been exported to Europe, American and Middle East.
Packing:
Sea Shipment
About delivery:
Payment:TT/LC:30% advance payment.70%before shipment
Delivery time:We will send the goods as soon as we get the advance payment as we have it in stock.
Should you have any interest or questions about our products, please feel free to contact me.
