Brief Instruction
TLD-M1H is used for wherever vehicles have to be detected, for example for monitoring and safe-guarding access ways or for counting vehicles. The output signal can be used for controlling door drive mechanisms, operating barriers, activating card dispensers etc.
Loop Installation
The loop(heat-resisting Teflon wire)is normally buried in a parallelogram form gap. After the test, seal the gap with liquid pitch. 1 to 2 circles of loops should be added as compensation when there are metal things under the ground. And the inductance should be kept at 150-300uH.The lead time must be twisted together closely, so as to prevent the disturbance caused by shock.