.jpg)
Features:
1) CK6125, CK6125-1 type CNC controlled lathe is used to turning inner outer cylindrical surface, end surface, taper surface and thread of shaft etc., with highly efficient and precision working. The Tools is adopted gang-type tool apron, Turning tool can be fitted 4-6, it also can be fitted 4 position motor compound rest according to customers requests. The CNC control is adopted with Beijing KND-100T system or Guangzhou CNC 980TA/TD and be fitted with different CNC system according to customers requests. The spindle drive speed is adjusted by alterantion and frequency conversion, it realized permanent speed turning.
2) The machine tool adopted sliding guide ways. X and Z axes leading screws are adopted 2 gradation accuracy ball screws, the accuracy of leading screws is most high grade in domestic made in HANJIANG screw & guide works. The leading screw is in center type (it is fitted in center of bed), torque was eliminated, transmissive stability was raised. The lathe is adopted whole modular cast, it is treated aging, so that cast is not deformation, with this result supporting rigidity increase, and raise turning stability. The leading screw of bed was protect with straight plate (non-folding protective shield), as a result protection water and protection of chips was raised. The machine tool guide way and leading screws are both lubricated periodically. The machine tool is protected entirely closed, compact construction, with small area.
3) CK6125 the spindle supporter are adopted with pre-loading accurate and angular contact ball bearings(assembly by bearing works),CK6125-1 the spindle supporter is adopted with pre-loading accurate and angular contact ball bearings (assembly by bearing works), and with double cylindrical roll bearing. They can be acquire to optimize compound with high precision, high rigidity, high load bearing ability and turning speed. The machine tool has been fitted hydraulic tank, it is adopted hydraulic-clamping collet chuck device (or CK6125 can be fixed Φ135 chuck with through hole; CK6125-1 can be fixed Φ160 chuck with through hole), can be fixed feeding support device in the form of weigh or hydraulic support device of automatic feeding, and so it adapts process automation.
1) CK6125, CK6125-1 type CNC controlled lathe is used to turning inner outer cylindrical surface, end surface, taper surface and thread of shaft etc., with highly efficient and precision working. The Tools is adopted gang-type tool apron, Turning tool can be fitted 4-6, it also can be fitted 4 position motor compound rest according to customers requests. The CNC control is adopted with Beijing KND-100T system or Guangzhou CNC 980TA/TD and be fitted with different CNC system according to customers requests. The spindle drive speed is adjusted by alterantion and frequency conversion, it realized permanent speed turning.
2) The machine tool adopted sliding guide ways. X and Z axes leading screws are adopted 2 gradation accuracy ball screws, the accuracy of leading screws is most high grade in domestic made in HANJIANG screw & guide works. The leading screw is in center type (it is fitted in center of bed), torque was eliminated, transmissive stability was raised. The lathe is adopted whole modular cast, it is treated aging, so that cast is not deformation, with this result supporting rigidity increase, and raise turning stability. The leading screw of bed was protect with straight plate (non-folding protective shield), as a result protection water and protection of chips was raised. The machine tool guide way and leading screws are both lubricated periodically. The machine tool is protected entirely closed, compact construction, with small area.
3) CK6125 the spindle supporter are adopted with pre-loading accurate and angular contact ball bearings(assembly by bearing works),CK6125-1 the spindle supporter is adopted with pre-loading accurate and angular contact ball bearings (assembly by bearing works), and with double cylindrical roll bearing. They can be acquire to optimize compound with high precision, high rigidity, high load bearing ability and turning speed. The machine tool has been fitted hydraulic tank, it is adopted hydraulic-clamping collet chuck device (or CK6125 can be fixed Φ135 chuck with through hole; CK6125-1 can be fixed Φ160 chuck with through hole), can be fixed feeding support device in the form of weigh or hydraulic support device of automatic feeding, and so it adapts process automation.
.jpg)
.jpg)
.jpg)
.jpg)
