FSO600 One Way Clutches Sprag Type (63.50/69.09x136.5x92.07mm) One Way Bearings Stieber bearing supported Freewheel Clutch | |||||||||||||
| A . One Way Clutches Sprag Type Parameters | |||||||||||||
| Brand- | TMP | ||||||||||||
| Model number- | FSO600 | ||||||||||||
| Inner ring(mm)- | 63.50/69.09 | ||||||||||||
| Outer ring(mm)- | 136.5 | ||||||||||||
| Width(mm)- | 92.07 | ||||||||||||
| Weight(Kg)- | |||||||||||||
| Drag torque(Nm)- | 3105 | ||||||||||||
| Materials- | GCR15 | ||||||||||||
| Series- | FSO | ||||||||||||
| Lubrication type- | Grease/oil | ||||||||||||
| Clutch type- | Sprag | ||||||||||||
| Precision- | P0 | ||||||||||||
| Structure- | Types FSO are sprag type freewheels self-contained, sealed and bearing supported, using two ball bearings. | ||||||||||||
| B . FSO600 One Way Clutches Sprag Type Specification Sheet | |||||||||||||
| Model Number | Torque Drag(Nm) | Overrunning speeds(r/min) | Diameter(mm) | G | |||||||||
| Inner Race | Outer Race | A | B | C | D | E | S | H | Num | Holes | Depth | ||
| FSO600 | 3105 | 2200 | 750 | 92.07 | 136.5 | 95.25 | 63.50/69.09 | 120.65 | - | 1.58×45° | 6 | M8 | 15.87 |
| C . FSO Series One Way Clutches Sprag Type Details | |||||||||||||
Product Features | One Way Clutches Sprag Type mainly used as Backstop clutches(Most suitable as backstops, and mostly the contact-free versions); Backstop clutches:The freewheel allows rotation in one direction only. It overruns continuously during operation. The freewheel prevents reverse rotation if the drive is disconnected. | ||||||||||||
Series Introduction | Types FS, FSO, and HPI 300 to 1027 are sprag type freewheels self-contained, sealed and bearing supported, using two ball bearings.Units are delivered oil or grease lubricated accordingto the type. It is a Formsprag USA design that uses tall sprags with multi-radius active surfaces. Designed specially for large size freewheels to compensate for any eccentricity due to bearing wear. Types FS and HPI are oil lubricated and use standard haft lip seals. Type FSO isgrease lubricated and equipped with special grease seals. Type HPI is specially designed for high speed indexing applications. Each of the different models show a range of standard metric bore diameters. We can supply any bore size between the minimum and maximum specified in the table, including imperial sizes. | ||||||||||||
Series Model No. | FSO300 FSO400 FSO500 FSO600 FSO700 FSO750 FSO800 FSO900 FSO1027 | ||||||||||||
| Applications | Reducers , Flender Gearbox ,SEW Gearbox; Overrunning clutch:for multiple-machine drives or to separate the inertia of masses of a driven machine from the driving machine after it has been switched off.Indexing clutch:which turns a shaft step by step, thus achieving indexed material feed or a variable speed. Backstop clutch:to prevent a machine shaft turning backwards. In this case the overrunning clutch acts as a brake. | ||||||||||||
| D . FSO type One Way Clutches Sprag Type Installation & Cautions | |||||||||||||
For all freewheel inner races connected to shaft by a key, our stand-ard bore tolerance is H7, with keyway to JS10. If no other indication we recommend a shaft tolerance of h6 or j6. For maximum indexing accuracy, adjusted keys should be machined to give no clearance. Shaft and bore tolerances are speci-fied on the pages for each type where press fitting is appropriate.As with standard bearings, suitable tooling must be used for press fitting such that no axial load is transmitted through the inner part of the freewheel during assembly. | |||||||||||||
| http://www.aliexpress.com/store/1500617 | |||||||||||||
| http://www.aliexpress.com/store/1462552 | |||||||||||||
| http://www.tradebearings.com/so21986/ | |||||||||||||
| http://tmpmachine.sell.everychina.com/ | |||||||||||||
| http://so21986.tradeprince.com/ | |||||||||||||
| http://so21986.en.ec21.com/ | |||||||||||||
| http://so21986.en.gongchang.com/ | |||||||||||||
| http://www.made-in-china.com/showroom/so21986 | |||||||||||||
| http://tmpparts.en.hisupplier.com/ | |||||||||||||
TMP Bearrings,Crossed roller bearing,Thin section bearing,Turntable bearing,Ceramic Ball Bearings,Bearing ,Slewing bearing,Robotic bearing,YRT Rotary Table Bearing,Angular Contact Ball Bearing,Thin section ball bearing ,One Way Clutches,One Way Bearings,Drawn Cup Roller Clutches,Overrunning clutches,Indexing clutches,Backstop clutches | |||||||||||||
