Pneumatic tube clutch for the workover drilling rig
Pneumatic type clutch according to its construction form of different can is divided into the common type again is two kinds of with well ventilated type.
1. Common type
Depending the Pneumatic delivers to torque the construction is simple make and installing the technique request to be low thermolysis would be better to not as good as ventilated type the Pneumatic capacity is bigger the aeration and deflate time longer easy is slippery.
2. Ventilated type
Aim at the not enough an a kind of spirit for but developing clutch in common type increased on the construction a set of spread the heat spread it can equip.
Common type Pneumatic tube clutch | 300/100 | 500/125 | 600/125 | 700/200 | 700/135CBC | 800/135 | |
drawing | 115.101.00 | 115.102.00 | 115.105.00 | 115.103.00 | 115.107.00 | T14-013-00 | |
rotata speed r/min | max | 2332-2667 | 1642-1877 | 1352-1547 | 1315-1504 | 1198-1450 | 1099-1328 |
rating | 1348-1542 | 949-1085 | 781-894 | 760-869 | 687-881 | 635-768 | |
torsional moment N·m | max | 3080 -4030 | 10455 -13670 | 14810 -19360 | 33080 -43270 | 22350 -32660 | 28850 -42160 |
rating | 2025 -2686 | 6970 -9114 | 9875 -12908 | 22060 -28850 | 14900 -21775 | 19230 -28080 | |
working pressure | 0.7-0.9 | 0.7-0.9 | 0.7-0.9 | 0.7-0.9 | 0.7-1.0 | 0.7-1.0 | |
pneumatic tube cubage | 1.3 | 5.5 | 5.5 | 17 | 2-4 | 2.4-5 | |
attrition annulus dia. | Ф300 | Ф497 | Ф597 | Ф695 | Ф700 | Ф800 | |
join link size | max dia. | Ф450 | Ф720 | Ф820 | Ф1000 | Ф900 | Ф1015 |
max width | 115 | 154 | 154 | 246 | 176 | 176 | |
orientation dia. | Ф450h11 | Ф720 h11 | Ф820 h11 | Ф1000 h11 | Ф900 h11 | Ф1015 h11 | |
bolt number | 12-Ф13H12 | 12-Ф17 H12 | 16-Ф17 H12 | 12-Ф27 H12 4-Ф25H8 | 20-Ф17 H12 | 18-Ф17 H12 6-Ф17+0.043 | |
bolt distributing dia. | Ф430 | Ф690 | Ф790 | Ф950 | Ф870 | Ф975 | |
air inlet pipe | M20×1.5 | M20×1.5 | M20×1.5 | M33×1.5 | 2-M20×1.5 | 2-M20×1.5 | |
