AC DC Led Power Supply Transformer Adaptor 12 Volt DC and 24 Volt DC SE-1000W
Enclosed SE Series 100w-450w Miniature Features:
1. AC input selectable by switch
2. Withstand 300VAC surge input for 5 seconds (SE-200/350)
3. Protections: Short circuit / Overload / Over voltage / Over temperature (except for SE-100)
4. Forced air cooling by built-in DC fan (SE-350/450)
5. Built-in fan ON/OFF control (SE-350)
6. Built-in constant current limiting circuit (SE-200/350)
7. Withstand 5G vibration test (SE-200/350)
8. Built-in remote sense function (SE-450)
9. 100% full load burn-in test
10. LED indicator for power on
11. 2 years warranty
Enclosed SE Series 600W~1500W Single Output Features:
1. AC input selectable by switch (SE-600/1000)
AC input 180~264VAC only (SE-1500)
2. Protections: Short circuit / Overload / Over voltage / Over temp.
3. Forced air cooling by built-in DC fan
4. Built-in remote sense function
5. DC OK, remote ON/OFF control (SE-1000/1500)
6. 100% full load burn-in test
7. LED indicator for power on
8. 2 years warranty
AC input voltage range .........90~132VAC / 180~264VAC selected by switch(600W/1000W); 180~264VAC(1500W)
AC inrush current .................Cold start, 60A at 230VAC(600W/1500W) Cold start, 55A at 230VAC(1000W)
DC adjustment range ............±10% rated output voltage
Overload protection ..............105%~125% Shut down o/p voltage, re-power on to recover
Over voltage protection..........115%~140% rated output voltage
Withstand voltage ................I/P-O/P: 3kVAC, I/P-FG: 1.5kVAC, 1 minute
Working temperature ............-20~+60°C(600W/1000W); -20~+70°C(1500W)
Safety standards ..................UL60950-1 approved
EMC standards ....................Design refer to EN55022 class B
Connection ..........................Terminal block with cover for input and output (SE-1000/1500: copper pillars for output)
Enclosed Switching Power Supplies
SE Series:
Single Output Switching Power Supply: SE-100, SE-200, SE-350, SE-450, SE-600, SE-1000, SE-1500
Quick Details of 1000w Single Output LED Switching Power Supply:
| 1000W-Single Output | ||||
| Model No. | Output | Tol. | R&N | Effi. |
| SE-1000-5 | 5V, 0~150A | ±1% | 150mV | 81% |
| SE-1000-9 | 9V, 0~100A | ±1% | 150mV | 84% |
| SE-1000-12 | 12V, 0~83.3A | ±1% | 150mV | 85% |
| SE-1000-15 | 15V, 0~66.7A | ±1% | 150mV | 86% |
| SE-1000-24 | 24V, 0~41.7A | ±1% | 200mV | 88% |
| SE-1000-48 | 48V, 0~20.8A | ±1% | 200mV | 89% |
NOTE:
1. All parameters not specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. By using UVP circuit, PSU will not turn on direct by in AC continue ON/OFF condition within 5 sec.
SE-1000 Series Datasheet:
SE Series SE-1000 Models Available:
SE-1000-5
SE-1000-9
SE-1000-12
SE-1000-15
SE-1000-24
SE-1000-48
