100w AC DC LED Power Supply 12V 24V Constant Voltage LED Transformer NES-100
Enclosed NE Series 15w-350w Miniature Features:
1. Universal AC input / Full range ( NES/D-100, NES-150 AC input selectable by switch )
2. Protections: Short circuit / Overload / Over voltage
3. Built-in over temperature protection for NES-15
4. Cooling by free air convection
5. Small size, high power density
6. Low cost, high reliability
7. 100% full load burn-in test
8. Most economical low wattage solution with safety certificates
9. 2 years warranty
NE Series NES-100 Single Output Switching Power Supply Features:
1. Protections: Short circuit / Overload / Over voltage
2. Cooling by free air convection
3. LED indicator for power on
4. 100% full load burn-in test
5. 2 years warranty
6. VOLTAGE RANGE: 85 ~ 132VAC / 176 ~ 264VAC selected by switch 248 ~ 373VDC
7. FREQUENCY RANGE: 47 ~ 63Hz
8. AC CURRENT (Typ.): 2A/115VAC 1.2A/230VAC
9. INRUSH CURRENT (Typ.): COLD START 45A
10. LEAKAGE CURRENT: <2mA / 240VAC
Enclosed Switching Power Supply
NE Series:
NES-15 / 25 / 35 / 50 / 75/ 100 / 150
NED-35 / 50 / 75 / 100, NET-35 / 50 / 75
NES-200, NES-350
Quick Details:
| 100W-Single Output | ||||
| Model No. | Output | Tol. | R&N | Effi. |
| NES-100-5 | 5V, 0~20A | ±2% | 80mV | 80% |
| NES-100-7.5 | 7.5V, 0~13.6A | ±1% | 120mV | 81% |
| NES-100-9 | 9V, 0~11.2A | ±1% | 120mV | 81% |
| NES-100-12 | 12V, 0~8.5A | ±1% | 120mV | 83% |
| NES-100-15 | 15V, 0~7.0A | ±1% | 120mV | 84% |
| NES-100-24 | 24V, 0~4.5A | ±1% | 120mV | 86% |
| NES-100-48 | 48V, 0~2.3A | ±1% | 150mV | 86% |
General Specifications:
| Model No. | NES-100 |
| AC input voltage range | 115/230VAC by switch |
| AC inrush current (max.) | Cold start, 45A at 230VAC |
| DC adjustment range | -5%~+10% (NES-100/150) CH1 -5%~+10% (NED-100) |
| Overload protection | 110%~150% hiccup mode, auto-recovery |
| Over voltage protection | 115%~135% hiccup mode, auto-recovery |
| Withstand voltage | I/P - O/P: 3kVAC, I/P - FG: 2kVAC, O/P - FG: 0.5kVAC, 1 minute |
| Working temperature | -20~+60°C (refer to the derating curve for different models) |
| Vibration | 10~500Hz, 2G 10min. /1 cycle, |
| Safety standards | UL60950-1, EN60950-1(NES-150 only), GB4943(NES only) approved, |
| EMC standards | EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, GB9254(NES only) |
| Connection | Terminal block for input and output |
| Dimension (LxWxH)(mm) | 159x 97x 38 |
| Case No. | 901 |
| Packing | 30pcs/17.5kg |
NOTE:
1. All parameters not specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 0% to 100% rated load.
6. For the request of GB4943.1,the power supply is only suitable for use in the altitude 2000m below and the non tropical climate condition.
7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to “EMI testing of component power supplies.”
8. When using DC voltage as the input, please connect positive pole of input voltage to mark “N” of the terminal block and negative pole of input voltage to mark “L” of the terminal block.
NES-100 Series Datasheet:
NES Series NES-100 Models Available:
NES-100-5
NES-100-7.5
NES-100-9
NES-100-12
NES-100-15
