125W Dual Output AC DC LED Power Supply Switching Mode RD-125 Series
G3 Series RD-125 Enclosed Switching Power Supply Features:
1. Protections: Short circuit / Overload / Over voltage
2. Cooling by free air convection
3. LED indicator for power on
4. 100% full load burn-in test
5. All using 105 celsius long life electrolytic capacitors
6. Withstand 300VAC surge input for 5 second
7. High operating temperature up to 70 celsius
8. Withstand 5G vibration test
9. High efficiency, long life and high reliability
10. 3 years warranty
Meanwell G3 Series AC to DC Switching Power Supplies:
RS-15 / RS-25 / RS-35 / RS-50 / RS-75 / RS-100 / RS-150
RD-35 / RD-50 / RD-65 / RD-85 / RD-125
RID-50 / RID-65 / RID-85 / RID-125, RT-50 / RT-65 / RT-85 / RT-125
RQ-50 / RQ-65 / RQ-85 / RQ-125
Quick Details:
| 125W - Dual Output | ||||
| Model No. | Output | Tol. | R&N | Effi. |
| RD-125A |
5V, 2.0~15A
12V, 0.5~10A |
±5%
±7% |
80mV
120mV |
82% |
| RD-125B |
5V, 2.0~10A
24V, 0.4~5.0A |
±5%
±7% |
80mV
120mV |
86% |
General Specifications:
| Model No. | RS-150 RD / RID / RT / RQ-125 |
| AC input voltage range | 115 / 230VAC by switch |
| AC inrush current (max.) | 40A at 230VAC |
| DC adjustment range |
±10% by potentiometer for single output; CH1 -5%~+10% by potentiometer for multiple output |
| Overload protection | 110%~150% hiccup mode, auto-recovery (150% ~190% for RID-125-1205/2405) |
| Over voltage protection | 115%~135% rated output voltage, hiccup mode, auto-recovery |
| Withstand voltage | I/P - O/P: 3kVAC, I/P - FG: 1.5kVAC, O/P - FG: 0.5kVAC, 1 minute |
| Working temperature | -25~+70°C (refer to the derating curve for different models) |
| Vibration |
10~500Hz, 5G 10min. /1 cycle, period for 60 min. each along X, Y, Z axes |
| Safety standards | UL60950-1, TUV EN60950-1 approved |
| EMC standards |
EN55022 class B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 (EN50082-2) (35~150W) |
| Connection | Terminal block for input and output |
| Dimension (LxWxH)(mm) | 199x 98x 38 |
| Case No. | 902A |
| Packing | 20pcs /15kg |
NOTE:
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 celsius of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. Line regulation is measured from low line to high line at rated load.
5. Load regulation is measured from 20% to 100% rated load, and other output at 60% rated load.
6. Each output can work within current range. But total output power can't exceed rated output power.
7. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
8. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time.
For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies.
DATASHEET:
Meanwell AC Switching Power Supply of Our Product Range:
G3 Series
NE Series
SE Series
LRS Series
Your inquiries are highly welcome!
