SAT10 Capacity: 1.0 Ton daily tube ice machine
| Model | - | SAT10 |
| Capacity | Ton/d | 1 |
| Refrigeration capacity | kW | 11.6 |
| Input power | kW | 6.33 |
| Rated current | A | 11.74 |
| Power supply | - | 380V-3P-50Hz |
| Ambient temperature | ℃ | 35 |
| Water inlet temperature | ℃ | 20 |
| Ice temperature | ℃ | -3 |
| Compressor power | kW | 5.1 |
| Refrigerant | - | R404A/R22 |
| Cooling way | - | Water cooling/Air cooling |
| condenser Capacity | kW | 17 |
| condenser water flow | M3/H | 2.924 |
| Cooling tower power | kW | 0.12 |
| Cooling pump power | kW | 0.4 |
| Power of cutter | kW | 0.45 |
| Chilling pump power | kW | 0.26 |
| All water consumption | M3/H | 0.071 |
| Size of ice maker | L×W×H mm | 1460×925×1750 |
| Size of evaporator | L×W×H mm | Included in the unit |
| Operating weight | Kg | 1000 |
The frame and principle
01.Overflowport
02.Upperwater tank
03.Refrigerants outlet
04.Stainless steel heat exchange tubes
05.Supercoolingcavity
06.Speedreducer
07.Motor
08.Driving gear
09.Driven gear
10.Waterinlet
11.Observationwindow
12.Floatvalve
13.Diffuser
14.Waterpipe
15.Shell
16.Iceskates
17.Hot refrigerants inlet
18.Cooling refrigerants inlet
19.Baffle
20.Water pump
21.Ice water separation turntable
22.Iceoutlet
23.Underwater tank
24.Outfall
The core component of the tube ice machine is the ice-making evaporator and its main body is a vertical shell and tube type device. Several stainless steel heat exchange tubes run through the upper tube plate and the lower tube plate and each of the top and bottom has a water tank. Refrigerant is evaporated in the main body during the ice making process, absorbing heat from water of the upper tank flowing along the inside wall of heat exchange tubes. Water is frozen into ice attached to the inside wall of the steel pipes. When the ice reaches the desired thickness, refrigeration system will change into doffing ice mode automatically to doff ice. Simultaneously high temperature gas refrigerant will be supplied into the evaporator shell, promoting the formation of a layer of water film between ice and evaporation wall. Thus ice inside the tube wall will fall by gravity, and simultaneously will be cut off by the rotating ice cutter below, discharged along the ice outlet. When ice making is finished, low temperature refrigerant will carry on heat exchange again, which recycles the energy of ice doffing and improves the cooling performance of units.
Features of tube ice machine
compact structure, less premise, lower production cost, high COP, more energy saving, short installation period, easy operation.
Tube ice is a kind of hollow cylindrical tubular ice, whose inner hole diameter of 5～15mm,ranging from 40～60mm long. Its external diameter can be divided into three specifications :φ22mm,φ29mm and φ35mm.
Tube ice has good air permeability for its hollow tubular shape. It is more suitable for storage and transportation because the melting time of the tube ice is longer than the flake ice.
The part in contact with the ice is totally made from food grade stainless steel and PP materials, which is environmentally friendly and sanitary, completely conforming to the food standard.
This transparent tube ice is widely used to mix wines, freeze drinks, make ice pastries and keep fresh etc. in foreign countries.
| Product Model Category | Capacity:Tons/daily |
| Small capacity tube ice machine | 0～3 |
| Medium capacity tube ice machine | 3～10 |
| Large capacity tube ice machine | ≧10 |
