High Efficient Vaccum EPS Foam Block Molding Machine Low Moisture 25Kg / Cycle
Feature:
It adopts Japan Mitsubishi Corporation PLC,
imported touch screen, full English display,
graphical interfaces
intelligent control,
achieve man-machine conversation.
Application:
The fat barrel,outside all stainless steel compartment has insulation measures,reliable performance,
reasonable structure,beautiful,stable quality,high production efficiency ,increase 2-3times than the average
machine,low energy consumption 25%.
The machine feed system including a feeding device and the secondary device, a feeding device by
adjusting the feed rate of transmission in order to ensure a stable feed.
EPS beads through the material,the foam into the fluidized bed dryer(customer optional)and then into
the aging silo through the fan delivery device,complete raw foaming process.Process cycle according
to the second foam.
The machine produced more uniform density can foam density 7-35kg/m³.
Let the steam valve,the user can choose according to need.
Technology Data:
Item |
Unit |
PB2000VS |
|
Mould Cavity Dimension |
mm |
2040*1240*1030 |
|
Block Size |
mm |
2000*1200*1000 |
|
Steam |
Entry |
Inch |
DN50 |
Consumption |
Kg/Cycle |
25~45 |
|
Pressure |
Mpa |
0.6-0.8 |
Compressed Air |
Entry |
Inch |
DN40 |
Consumption |
m³/Cycle |
0.4 |
|
Pressure |
Mpa |
0.6~0.8 |
|
Drainage |
Vacuum Drain |
Inch |
DN100 |
Down Steam Vent |
Inch |
DN100 |
|
Air Cooling Vent |
Inch |
DN100 |
|
Vacuum Cooling Water |
Entry |
Inch |
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|