Metal Hydraulic Cutting Machine For CR 0.5-2mm Thick ,1250mm Width
- Application:CR/HRC/stainless steel /galvanized
- thickness of coil plate:0.5-2mm
- width of coil plate:1250mm
- coil weight:10MT(max)
- line speed:0-40m/min
Specifications:
Application: | CR/HRC/stainless steel /galvanized and so on |
thickness of coil plate: | 0.5-2mm |
width of coil plate: | 1250mm |
coil weight: | 10MT(max) |
coil I.D: | 508 |
coil O.D: | 1400mm |
the diameter of slitting blade shaft | 120 |
slitting blade: | Φ120Xφ200X10 |
material of slitting blade: | 6Crw2Si |
the hardness of slitting blade: | HRC58°-60° |
recoiler I.D: | φ508 |
power: | 380V/50Hz/3Ph |
tolerance of width error: | ≤±0.05mm/2M |
line speed | 0-40m/min |
Production orientation | from right to left |
ZJX-0.5-2X1250mm hydraulicslitting line is used for slitting the carbon plate to prepare for the next process.
1. Hydraulic coil Car (1.5KW)
The car can move levelly and vertically, which is convenient for putting the steel coils to the un-coiler.
It is driven vertically by hydraulic cylinder with 4 guide pillars.
The level movement is driven by cycloid motor.
2. Hydraulic de-coiler (7.5KW)
supporting steel rolls and uncoiling
the movable structure of double way hydraulic top tight
hydraulic pressure drives the level and landscape orientation movement
3. Slitting machine (15KW)
Drive system consists of drive stand, decelerator, 15KW motor, the gear distribution box,
coupler, connection shafts and cover.
Main section is made up of base, fixed brackets, large slide block, 2 blade pivot(Φ120mm ),movable brackets, slide block, the adjustment device of front and back of the brackets and the lifting device of blade pivot, supporting 10 blades, isolating cover and rubber ring, etc.
the main section adopts manually move out the brackets which is very convenient to change the blades
4. Scrap Winder (5.5KW)
It consists of base, the shaft and plate of edge material, friction wheel, supporting wheel chain, chain, decelerator and 5.5Kw electric machine.
5.Tension stand
consist of base, pre-dividing shaft, bracket, press shaft, hydraulic damp device and
hydraulic shaft lifting the pres
6.Hydraulic recoiler (30KW)
It is consist of base, bearing frame, recoiler shaft, the expansion device of hydraulic recoiling, the expanded recoiling plate, movable arm bearing, supporting decelerator and motor.
7. Hydraulic unload car (1.5KW)
the car can carry the dividing coils and lift up and down and is movable
8. Electrical control system: including the complete wire to installation as well as the electrical box to operate the whole lines
9. Hydraulic System :the hydraulic stand, pipes and the connect part
Applications:
ZJX-0.2-2X1250mm hydraulic slitting line is used for slitting the CR/HRC/stainless steel /galvanized to prepare for the next process.
Competitive Advantage:
1. it is driven by hydraulic and the electricity
2. convenient to operate
3. high production and competitive price.