Post Cutting Square Downspout / Down Pipe Roll Forming Machine For Rainwater Pipes

Main Equipment of Downpipe Roll Forming Machine

1. 3T manual de-coiler

-- Mode of expand &fight: inner expand &fight by manual

-- Way of feeding: manual

2. Feeding device

-- Adjustable center of the forming rollers and of sufficient length to prevent lateral movement of the strip on its entry to flattener.

-- Feeding type: adjustable

-- Entrance and guide roller

3. Roll Forming Machine

-- Transmission: by chain, one inch, Single line

-- Roll former has leveling bolts in the base for adjust the leveling

-- Machine base frame adopt H beam welding steel

-- In the main roll forming machine have 1 button for urgency stop if happen any malfunction.

-- Machine adopt metal wall structure as station

-- To avoid accidents, all of drive part adopt protect cover

4. Post Cutting System

-- Profile transversal cutting device units allowing to cut the bent profile without damaging the metal   coating and to assure a smooth cutincluded

 -- Cutting after forming: Cut the sheet after roll forming to required length

 -- Uses two hydraulic cylinders for operation shall include a flow regulator to achieve a uniform lowering knife.

  -- Cutting power by hydraulic

  -- Length measuring: Automatic encoder length measuring

  -- The cutting sequence is also contained and controlled by the same PLC program

  -- Tolerance of length: +/- 1.5mm for each piece end product

5. Hydraulic station

6. Control desk

 -- Programmable setting of profile length and quantity

 -- Programmable cutting unit, various lengths in one programming cycle without

 quantity restrictions (without stopping the operating equipment): will be provided.

  -- 5 groups datas can be set in one time

 -- Automatic stopping of the equipment after completion of the cutting programmewill be provided.

 -- Computer used to control length & quantity. Machine will automatically cut to

length and stop when required quantity is achieved

 -- Length inaccuracy can be amended easily

 -- Control panel: Button-type switch and touch screen

 -- PLC brand: Panasonic

 -- Frequency converter brand: Yaskawa

-- Touch screen: Taiwan Weinview

7. Rainspout / Downpipe elbow machine:

-- Control system: Strong electrical current

-- Max bend angle: 90°

-- Function: bend and fasten at the same time

-- Speed of bend: 0-5m/ min

Main Components of Downpipe Roll Forming Machine

Contact Us 

For more information, please contact us freely.

Skype: sarahrishbin

Mobile: +86-18118899986

E-mail: sarahrishbin@gmail.com