Custom Projected Capacitive Touch GG Structure Focaltech 5506 Chip
Quick Detail:
- Cover Glass+OCA+ITO Glass+FPC
- Surface Hardness: 7H
- Sensor Process: Printing
- Interface: I2C
- Work Voltage: 2.8V-3.3 V
- Light Transmittance: ≥86
Assembly Precautions:
- Do not exert extra force to touch panel.
- Since touch panel is transparent and clear,make sure to wear fingerstall or glove before touching.Be careful of your hands and other parts from injury at handling by glass corners.
- When handling,make sure to hold the touch panel borders not center parts to avoid dirt to touch panel. Do not lift touch panel by tail to avoid tail loosen.
- When installing and assembling, do not lift tail with heavy force to avoid tail peeling off touch panel.
- Do not stick or mount other parts on the tail, such as additional film or metal plate. As it will exert extra force to tail tip and cause tail loosen.
- Please don't pull FPC with force from side to side, because the FPC tension will make FPC burst.
- If there is air groove on touch panel, when design product structure, make sure no liquid and powder near the air groove.
- In order to avoid heavy stress to touch panel surface, make sure to keep 0.2mm-0.5mm assembling gap between touch panel and case.
Specification:
Model No. |
SCT-GA0-004948A |
Size |
10.1 inch |
Active Area |
219 x 137.6mm |
Outline Dimension |
250 x 170mm |
Structure |
Cover Glass + Sensor Glass |
Cover Glass |
1.1mm |
Sensor Glass |
0.55mm |
Total Thickness |
2.1±0.1mm |
FPC |
Pitch=0.5mm |
Surface Hardness |
7H |
Connection |
COF |
IC Model |
FT5506 |
Multi Touch |
10 Points |
Interface |
I2C |
Transmittance |
≥86% |
Working Voltage |
2.8-3.3V |
Operating System |
&n |