Automatic High-speed Walk Through Metal Detector With High Level Detection Uniformity
Features:
Immediate selection of International security standards, detection of magnetic, non-magnetic and mixed alloy metal weapons, all functions programmable and controlled by a microprocessor
programming via built-in keypad and display or RS-232 serial connection to remote control unit (RCU2), a PC or a computer network programming access protected by hardware key
High-speed of detection
Very high-immunity to electromagnetic and mechanical interference
Multiple installations: automatic synchronization between two or more metal detectors with a reciprocal distance of down to 5 cm without the use of cables control unit incorporated into the detector professional high-integration and reliable electronics
No initial or periodic calibration
Easy maintenance: modular control unit for a rapid replacement
Installation data:
Power supply: 90 to 264V AC, 47 to 63Hz, 40VA
Operating temperature: -20 to+70°C
Storage temperature: -35 to +70°C
Relative humidity: 0 to 95% RH (without condensation)
Metal detector set weight: 35.6kg
Complete set weight: 50kg
|
Power supply: |
90 to 264V AC, 47 to 63Hz, 40VA |
|
Operating temperature: |
-20 to+70°C |
|
Storage temperature: |
-35 to +70°C |
|
Relative humidity: |
0 to 95% RH (without condensation) |
|
Metal detector set weight: |
35.6kg |
|
Complete set weight: |
50kg |
Alarm modes:
Visible signals
High-intensity display
Green and red metering signals proportional to the mass of the object detected audible signals
High-acoustic intensity alarm signal
Volume and tone of alarm signal can be programmed
Digitally adjustable sensitivity with a wide range of values.
All functions are controlled by a microprocessor.
Programming access protected by hardware key.
Automatic synchronization between two or more Metal Detectors, at a distance of down to 5 cm from each other, without using cables.
Professional high integration and high reliability electronics.
Control unit incorporated in the detector.
No initial or periodic calibration.
Easy maintenance. Modular control unit for a rapid replacement.
