Product Feature
1 Supply Voltage 36VDC
2 Drive Current 0.21-1.5A
3 1-64 subdivide can be chose, dynamic can change to subdivide(customize)
4 Optical isolation signal input
5 Optimize the noise of motor function
6 Can drive any two-phase, four-phase mixed stepping motor under 1.5A phase current
7 20KHz chopping frequency
Main Application Fields
Suitable for all kinds of small and medium-sized automation equipment and instruments, such as engraving machine, marking machine, cutting machine, laser typesetting, plotter, numerically controlled machine tools, automatic assembly equipment, etc. The application effect is very good for little noise and high speed equipment.
Electrical Specification
| Introduction | Unit | Minimum | Typical Value | Maximum |
| Output Current | A | 0.21 | 1 | 1.5 |
| Input Power Voltage | VDC | 18 | 24 | 36 |
| Control Signal Input Current | mA | 7 | 10 | 16 |
| Stepper Pulse Frequency | KHz | - | - | 100 |
| Pulse Low Level Time | μs | 5 |
Working Current Setting
| Output Effective Value Current | SW1 | SW2 | SW3 |
| 0.21 A | off | on | On |
| 0.42 A | on | off | on |
| 0.63 A | off | off | On |
| 0.84 A | on | on | off |
| 1.05 A | off | on | Off |
| 1.26 A | on | off | off |
| 1.5 A | off | off | off |
Micro-step Subdivide Setting
| steps/rev | SW4 | SW5 | SW6 |
| 200 | on | on | on |
| 400 | off | On | on |
| 800 | on | Off | on |
| 1600 | off | Off | on |
| 3200 | on | On | off |
| 6400 | off | On | off |
| 12800 | on | Off | off |
| Dynamic change subdivide | off | off | off |
Interface Signal
| Name | Function |
| PUL | Pulse signal: rising edge is valid, the motor step when pulse is from low to high. |
| DIR | Direction signal: can change motor direction, TTL level drive. |
| OPTO | Optical coupling drive power supply |
| ENA | Enable signal: forbid or enable drive to work, low level is forbid. |
| GND | DC power ground |
| +V | DC power positive pole, +18V-+40V any value is OK, recommend value is +24V. |
| A+ | Motor A phase |
| A- | Motor A phase |
| B+ | Motor B phase |
| B- | Motor B phase |
