Transparent LCD UV Glue Single Component Adhesive For Touch Screen
Specifications:
- UV Curable Adhesive
- Model No.: ADL-318
- Net Content: 50ml, 250ml
- Container: Black Plastic Bottle
- Single package size: 34X30X22 CM
Quick Detail:
- Transparent
- Great For Touch Screen
Technical Data:
| Viscosity: | 8000~14000mPa.s |
| Hardeness: | Shore 75D |
| Work Temperature: | -50~150 |
| Torsional Strength (Alumcake/glass): | 150Nm |
| Tensile Strength ( Pin/Glass): | 12Mpa |
| Density: | 1.05g/cm³ |
| CAS No.: | 66470-69-7 |
| MF: | C10H13NO4 |
| EINECS No.: | 229-746-76701-15-1 |
Description:
The 318 UV Curable Adhesive is ideal for bonding Touch Screen,LCD.It is easy to use and store. The UV adhesive can be cured very rapidly under UV light or sunlight. UV Curing Adhesive is also known as shadowless adhesive glue,Photosensitive adhesive, UV-curing adhesive glue is a kind of adhesive which must be exposured to ultraviolet light to cure. It can be used as a bonding agent, and also can be used as paints, coatings, inks and other plastic material. While you are trying to get great adhesive for touch Screen, this 318 UV adhesive in black bottle is good choice.
Instructions For Use of UV Adhesive:
1. Remove the dirt or grease on the subtracted, keep it dry before bonding with the Uv.adhesive For Touch Screen.
2. Spray UV adhesives on surface, and then put the two substrate surfaces together. Following, choose the UV light with proper wavelength (usually 365-400 nanometer) or high pressure mercury lamp. Radiate the adhesives from middle to the sides, and assure the light can pass through substrate to the bonding part.
3. Radiation time is suggested to be around 6 seconds. After the initial fixed position, remove the rest UV adhesive and reradiate it until full curing.
4. The curing time varies in bonding substrates, adhesive thickness and UV strength. we suggest that the users do a test about light strength so as to reduce the scrap rate before purchasing UV strength testers.
5. Temperature is also a point to affect adhesives activity. The curing time should be prolonged at low temperature.
6. Don’t squeeze or grind the substrate repeatedly in the process, and use the fixed tools;
7. Recommend the products with low viscosity are selected when the large area of substrate should be bonded. It is better to purchase vacuum equipment, because the rate of finished products can be improve if they bond in the vacuum environment.
8. When the UV adhesives bond plastics, consider the UV absorbent content in the plastic. The higher content has serious influence on UV transmittance, which affects the curing performance, even resulting in the adhesive that cannot cure.
The 318 is widely ordered by consummers around the world for touch screen adhesion. It provides a very effective adhesion for touch screen. Our 318 Uv adhesive for touch screen has successfully satisfied customers who need excellent adhesive for touch screen or LCD.
