Put drilling fluid materials (betonies, barite powder) and some
chemical additives (polymer) into circulation tank to increase total
drilling fluid preparation and change drilling fluid density, viscosity,
dehydration and so on. Direct inputting will cause a lot of settlement
or agglomerate of drilling fluid materials and chemical additives with
no gain of dispersed and well-proportioned drilling fluid.
The
mud mixer is a piece of equipment used together with solids control
system together. It can meet the requirements of drilling fluid
weighting and mixing for solids control system of 1,500 m to 7,000 m
drilling. This equipment is a single jet mixer combined with 45 Kw (or
55 Kw) sand pump and a jet mud hopper or a double jet mixer of two pumps
and two hoppers. It features as safe performance and convenient
transportation.
SPECIFICATION:
1. The jet mixing device is comprised of one sand pump, one jet mixer(or several pumps and mixers) , valves and manifold, convenient transporation, installation and service, etc.
2. Used for preparation and increase the total of drilling fluid, to change drilling fluid density, viscosity, water loss.
3. The novel jet injection device was designed by combining with venturi tube and original jet nozzle.
Technical parameters of several products:
| Model | SLH150-55 | SLH150-45 | SLH150-37 |
| Supporting sand pump power | 55KW | 45KW | 37KW |
| Funnel size | 750*750mm | 750*750mm | 600*600mm |
| Processing amount | 240m3/h | 220m3/h | 200m3/h |
| Working pressure | 0.25~0.6MPa | 0.25~0.6MPa | 0.25~0.6MPa |
| Inlet diameter | 8" | 8" | 6" |
| Outlet diameter | 6" | 6" | 6" |
| Maximum batching speed | 100kg/min | 80kg/min | 60kg/min |
| Weight | 2200kg | 2000kg | 1800kg |
| Dimension | 220*220*120cm | 220*220*120cm | 220*220*120cm |
