200L Carbonated Stainless Steel Cnical Fermentation Tanks 380V 50HZ Tanks
Introductions
The fermentation tank is used for mechanical blending and fermentation of liquid materials under certain temperature. The tank adopts internal recycling mode and blending paddle to distribute and break up materials. Good quality of blending are achieved. Tank body is made of SUS304 or SUS316L imported stainless steel, and automatic spraying and cleaning nozzle in the tank to ensure producing procedure comply with GMP requirements.
Configurations
1. Material imported stainless steel 316L or 304,
the inner surface polishing≤ Ra0.4μm,while the outer surface roughnessRa0.8μm.
2. Mechanical stirring on the top,can be any of propeller stirrer,anchor stirrer or frame stirrer.
3. Equipped with Air respirator, thermometer and temperature controlled systems,steam sterilization population,health type
inlet hole, liquid level gages, CIP spray cleaning ball or configures can according to customer requirements.
inlet hole, liquid level gages, CIP spray cleaning ball or configures can according to customer requirements.
4. Jacket according to customer requirements, half-coil pipe, full jacket and honeycomb plates.
5. Insulation,using rock wool,Polyurethane Foam:the outer can be polished by matte processing,mirror etc.
6. Spec: 3,000L-8,000L
Specifications:
Model |
Diameter |
Inner diameter |
Total height |
Insulation) |
Jacket |
Diameter of |
CHFG-500 |
500 |
800 |
2140 |
50 |
1.5 |
φ38 /φ51 |
CHFG-1 |
1000 |
1050 |
2380 |
50 |
1.5 |
φ38 /φ51 |
CHFG-1.5 |
1500 |
1180 |
2550 |
50 |
1.5 |
φ38 /φ51 |
CHFG-2 |
2000 |
1340 |
2760 |
50 |
1.5 |
φ38 /φ51 |
CHFG-2.5 |
2500 |
1420 |
2940 |
50 |
1.5 |
φ38 /φ51 |
CHFG-3 |
3000 |
1540 |
3050 |
50 |
1.5 |
φ38 /φ51 |
|