High Power 3000Lm COB 30 watt Outdoor Led Flood Light Bulb with 3 years Warranty
The high power 30w led flood light has a robust, aluminium alloy body with a quality finish to the housing and features toughened glass, making it perfect for use outdoors or indoors as required. It is ideal for use as an energy efficient lighting source; with potential savings of up to 80% in running costs compared with similar products. This super bright LED floodlight is recommended for security lighting, commercial lighting, residential lighting, spot lighting, garden/patio lighting, car parks, walkways and wall wash lighting. Suitable for commercial or home use.
.
- Working Lifespan: 50,000 hrs.
- CE,RoHS Approved
- LED Reflector for Instant Full Brightness
- Ideal for General Indoor or Outdoor use
- Waterproof IP65 Rating - Safe for Outdoor Use
- Ultra-Bright Energy Efficient LEDs with up to 80% Energy Saving (compared with a halogen lamp)
- Durable Construction with Die Cast Body and Toughened Glass
Specifications:
Model No. | SW-FL007-W30 |
Power | 30Watt |
Colour Temp (K) | 2700-7000k |
Beam angle (deg) | 120 |
Energy rating | 80% |
Colour rendering index | >75 |
Equivelent Helogen | 240~300W |
IP Rating | IP65 |
Lamp Efficiency | >88% |
Light output (lumens) | 3000Lm |
Luminous efficacy (lumens/Watt) | 100-110Lm/W |
Material | Aluminum |
Mounting arrangement | Fixing bracket provided |
Source Life | 50000 hours |
Power factor | 0.9 |
Supply Voltage (V) | AC85-265V |
Lamp Type | 1PC COB 30W |
Colour | Black |
Certificate | CE,RoHS |
Features:
- Easy to install and mount
- Adjustable mounting arm allows adjustment after fixed mounting
- Maintenance free
- Solid-state construction makes for high shock and vibration resistance
- COB LEDs are super bright, high intensity and low power consumption
- Extremely long life: up to 50,000 hours with very low time-luminosity decay
- No RF interference
Light distribution:
Installation instruction:
Step 1: Determine a location to install your LED floodlighting.
Step 2: Ensure that the mains electrical supply is switched off before any installation work begins. If
Required, remove the circuit fuse or lock off the MCB.
Step 3: Make a mark against the wall where the drill holes need to be placed by aligning the light’s bracket
against the wall.
Step 4: Connect the loose ends of the wire to an IP rated junction box or similar device. Be sure to set up the
polarities for the Live, Earth and Neutral wires correctly.
Step 5: Switch on the electricity to check the connections and floodlight.
Step 6: Angle the floodlight as desired and fix into place.