| wire diametre range | 0.17-1.2mm |
| Max winding speed | 3000/rpm |
| Circle | 0.1 |
| Power | 380V- 50/60HZ |
| Weight | 1100kg |
| Air pressure | 0.5mpa |
| Dimension | 1800 X1100 X2200mm |
II. Main components
Servo motor: Mitsubishi
Control system: Yitu Taiwan
Touchscreen: Tongtai
Sensor: Autonics
Switch and Button: Schneider
Other electric parts: Delixi /Schneider
III. Machine main function and characteristic
l. Winding tooling: each machine has one set winding tooling and three vertical winding forms.
2. The whole set of tooling can be changed, and it takes about 15min.
3. The turntable is two stations structure. It adopts servo system to rotate and index transfer form.
4. Allow three wires winding simultaneously.
5. Main spindle is controlled by servo motor. The coil turn number accuracy is ±1 turn.
6. The working rotation speed can be set. Machine has no distinct vibration and noise.
6. Free of enamel damage and wire snap. Once the copper wire is run out, machine will automatically stop.
7. PLC can set turn number, winding speed, tooling sunk height, tooling sunk speed and winding direction.
8. X and Y spindle of wire hooker and wire cutter adopts servo system. It can adjust the length of bridge wire and lead wire.
9. Tooling sunk adopts servo system. The max segment number of tooling sunk is 6.
