Smart Household Using Remote Control Vacuum Cleaner
Quick Details
- Model No.: KK8
- Installation: Robot / Automatic
- Brand: OEM / ODM
- Color: White / Black
- Materials: ABS
- Input Voltage: 100-240V
- Output Voltage: 24V 600mA
- Bag or Bagless: Bagless
- Function: Wet and Dry
- Battery Capacity: 1500mAH
- Battery Voltage: 14.4V Ni-MH battery
- Unit Average Power: 15~30W
- Capacity of Dust: 400ml
- Charging time: about 4h
- Working time: 80~90 minutes
- Place or Origin: China
- Certification: CB/CE/EMC/EMF/GS/RoHS/UL/CUL
Features:
- Remote controller with LCD screen, can set everything
- 0.4L dust bin capacity
- Stair Avoidance Detector
- Dustbin can be washed by water.
- Low noise compared with other models
- Remote Controller can operate the work in different directions
- Up to 7-days cleaning time setting on the charging home base
- Mopping towel at bottom to do mopping while vacuuming
- Four different cleaning modes: auto cleaning mode, spot cleaning mode, edge cleaning mode, scheduling mode.
- Easily take off the bag-less dustbin to discard the dirt that it picked up.
- Automatic Self-Recharging: the cleaner will automatically seek charging base
when battery is going to finish.
- Infrared sensor at bumper head to redirect the routine before collision (1-2 cm)
- Easy to take out spare parts and replace, removable and washable rubbish box
- With error code display function (the user can solve the problem by yourself)
- Suitable for home and office floor, such as woodiness floor, artificial plastic floor,
waterproof carpet, ceramic tile, under coat carpet and etc;
- HEPA filter traps dust, allergens and tiny particulates leaving behind fresh, clean air;
- Dirt Detect technology employs an acoustic sensor to identify dirtier areas and spends more time cleaning the area clean;
Specifications:
Diameter(mm): |
300 |
Obstacle Avoiding: |
Yes |
Height(mm): |
75 |
AUTO recharge: |
Yes |
Charger: |
DC24V 600mA |
Anti-collision system: |
Yes (front 100% anti-collision) |
Battery: |
Ni-Mh 14.4v Rechargeable |
All floor cleaning: |
Wood/Tile/short carpet/stone/linoleum |
Battery Capacity: |
1500MAH |
Anti-falling system: |
Yes |
Charging Duration: |
4Hours |
Time set-up system: |
Yes |
Vacuuming Duration: |
90 minutes |
LED screen: |
LED Touch screen |
Dust tank Capacity: |
0.4L |
Side brush function: |
Two side brushes |
Noise: |
60dB |
Spot clean: |
Yes |
Auto-vacuum: |
Yes |
Mop function: |
Yes |
Cleaning route: |
Auto / Spot / Edge / Scheduling |
System Alarm |
Yes |
Filtration system: |
HEPA &Primary filter |
Remote control: |
Yes |
Number of sensor: |
9 |
Spray color: |
IMD surface |
Obstacle Avoiding: |
Yes |
Color: |
White, Black |
Battery Charging:
Place charging home base against the wall, plug in adapter, and signal light on charging home base will flash.
Note: Put charging home base against the wall and remove obstacles about 1 meter distance at two sides and
2 meters ahead.Turn on the power switch on the bottom side of the robot, and then display indicator will be in
gradual blue,the robot is in standby. (If no command received,the robot will turn to sleeping mode
after 30 seconds.)
Note:
A. Please always keep the power switch turning on. If not, it is unable to make the robot work. B. If power switch is turned off, all the scheduled operation will be lost.
C. Before charging the robot, please make sure the power switch is turned on, or else the robot can not be charged.
Charge the robot in either way as shown below:
Plug the adapter into the robot and the other end to the power socket as below on the left;
Press HOME button on remote controller to direct the robot to charging home base for charging.
Charge the robot in either way as shown below:
Note:
- Make sure the power switch at the bottom side of the robot is on bef